4
VQT2H76
Accessory
Check the supplied accessories before using this unit.
1
Remote control
(N2QAKB000076)
1
Audio/Video cable
(K2KA6BA00004)
2
Batteries for remote control
1
AC power supply cord
(K2CB2CB00022)
1
Wireless LAN Adaptor (DY-WL10)
(C5ZZZ0000048)
1
USB extension cable
(K2KYYYY00064)
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to
the English display on the front and back side of the unit.
≥
Product numbers correct as of December 2009. These may be subject to
change.
≥
Do not use AC power supply cord and Wireless LAN Adaptor with other
equipment.
≥
Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory
Purchases (United States and Puerto Rico)” on page 40.
For other areas: To order accessories, call the dealer from whom you
have made your purchase.
Insert so the poles (
i
and
j
) match those in the remote
control.
Point it at remote control signal sensor on this unit. (
>
5)
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥
Do not mix old and new batteries or different types at the same time.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in an automobile exposed to direct sunlight
for a long period of time with doors and windows closed.
≥
Do not take apart or short circuit.
≥
Do not attempt to recharge alkaline or manganese batteries.
≥
Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Unit and media care
∫
Clean this unit with a soft, dry cloth
≥
Never use alcohol, paint thinner or benzine to clean this
unit.
≥
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
∫
Clean the lens with the lens cleaner
disc
∫
Clean discs
Wipe with a damp cloth and then wipe dry.
∫
Disc and card handling precautions
≥
Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥
Do not attach labels or stickers to discs.
≥
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥
Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥
Do not use the following discs:
– Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
∫
To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (
>
30, “To return all settings to the
factory preset.”)
≥
The operation history may be recorded in the memory of
this unit.
Using the remote control
R6/LR6, AA
(Alkaline or manganese
batteries)
Lens cleaner disc: RP-CL720PP (not included)
≥
This lens cleaner is sold as specific for DIGA, but can be
used on this unit as well.
DO
DO NOT
DMP-BD85VQT2H76_eng.book 4 ページ ２００９年１２月８日 火曜日 午後８時０分
