- 10 -
Connections and settings
Connections and settings
Connecting to a TV
Connect the power supply cord after making all connections.
≥
Before making any connections, we recommend that you temporarily disconnect all the units from AC
power outlet.
≥
Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic’s HDMI cable. When outputting 1080p or
[BDT271/270]
24p (4K) signal, please
use HDMI cables 5.0 meters (16.4 ft.) or less.
≥
This unit consumes a small amount of AC power (
32) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
Connecting to an amplifier/receiver
≥
Set “Digital Audio Output” (
≥
[BDT271/270]
When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV,
then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up
to 5.1ch.
≥
When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
HDMI IN
HDMI cable
AC power supply cord
(supplied)
AC adaptor (supplied)
[BDT271/270] [BD903/93]
To an AC outlet
[BDT271/270]
[BD903/93]
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable
HDMI cable
[BDT271/270] [BD903/93]
[BDT271/270]
[BD903/93]