background image

P

layb

ack

Referen

ce

29

TQBS0019

Reference

Setup menu

Change the unit’s settings if necessary. The 
settings remain intact even if you switch the unit 
to standby.

1

Press [HOME].

2

Select “Setup”.

3

Select “Player Settings”.

4

Select an item and change the settings.

To exit the screen

Press [HOME].

Video Format

The items supported by the connected devices 
are indicated on the screen as “

¢

”. When any 

item without “

¢

” is selected, the images may be 

distorted.

If “Automatic” is selected, the best suited output 
resolution to the connected TV is automatically 
selected.

4K(50p/60p) Output

This unit automatically chooses to output images 
in 4K*

1

 (50p/60p) when connected to a 4K (50p or 

60p) compatible TV. 

This item is available only when “Video Format” 
is set to “Automatic” and “4K”.

This item is not available when “HDMI(AUDIO) 
Output Mode” is set to “Video+Audio”.

To connect to a TV that supports 4K (50p/60p) 
4:4:4/8 bit or 4K (50p/60p) 4:2:2/12 bit, select 
“4K(50p/60p) 4:4:4”.
Images will not be output correctly with an 
HDMI cable that does not support 18 Gbps. 

To connect to a TV that supports 4K (50p/60p) 
4:2:0/8 bit, select “4K(50p/60p) 4:2:0”.

24p Output

Content recorded at 24p*

2

, such as BD-Video 

films, is output at 24p when played back.

When this unit is connected to TV compatible 
with 4K/24p and “Video Format” is set to 
“Automatic” or “4K”, images will be output in 4K/
24p.

When this unit is connected to a TV compatible 
with 1080/24p and “Video Format” is set to 
“Automatic”, “1080i” or “1080p”, images will be 
output in 1080/24p.

If images output in 24p are distorted, change 
the setting to “Off”.

HDMI(VIDEO) Output Mode

Set whether or not to output audio from the HDMI 
VIDEO OUT terminal.

When an amplifier is connected to the HDMI 
AUDIO OUT terminal and this menu item is set 
to “Automatic ( Video Only / Video+Audio )”, the 
TV may not output audio. In that case, select 
“Video+Audio”.

HDMI(AUDIO) Output Mode

Set whether or not to output images from the 
HDMI AUDIO OUT terminal.

It is not possible to output 3D, 4K or HDR 
content from the HDMI OUT terminal when 
“Video+Audio” is selected.

HDMI

OK

RETURN

Player Settings

System

Ratings

Network

Language

3D

Sound

Picture

HDMI

Video Format

Automatic

4K(50p/60p) Output

Off

24p Output

Automatic

HDMI(VIDEO) Output Mode

Automatic

HDMI(AUDIO) Output Mode

Audio Only

Advanced Settings

DMP-UB700_EB-TQBS0019.book  29 ページ  2016年8月26日 金曜日 午後12時2分

Summary of Contents for DMP-UB700













































Reviews: