30
TQBS0019
∫
Advanced Settings
Press [OK] to show the following settings:
¾
Colour Mode
This setting is for selecting colour-space
conversion of the image signal.
¾
Deep Colour Output
This setting is for selecting whether to use Deep
Colour Output when a TV that supports Deep
Colour is connected.
¾
High Dynamic Range Output
Output images in HDR (High Dynamic Range)
format depending on the content and connected
device.
¾
Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
¾
Audio Output
This setting selects whether or not to output
audio from HDMI.
≥
To enjoy audio with the HDMI terminal, select
“On”. To enjoy audio with the OPTICAL
terminal, select “Off”. Audio will not be output
from the HDMI terminal regardless of the
settings for HDMI(VIDEO) Output Mode and
HDMI(AUDIO) Output Mode.
¾
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is
automatically expanded and played back at
7.1ch.
≥
If “Off” is selected, sound is played over the
original number of channels. (Note that in the
case of 6.1ch audio, playback will be at
5.1ch.)
≥
Audio reformatting is enabled in the following
cases:
– When you have selected “PCM” in “Digital
Audio Output”.
– When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
– BD-Video playback
*1
A high resolution image/display technology of
approximately 4000 (width)
k
2000 (height) pixels.
*2
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
∫
Still Mode
Select the type of picture shown when you pause
playback.
∫
Seamless Play
The chapter segments in playlists are played
seamlessly.
≥
Select “On” when the picture freezes for a
moment at the chapters segment in playlists.
∫
Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥
“Automatic” is effective only when playing Dolby
TrueHD.
∫
Digital Audio Output
Press [OK] to show the following settings:
¾
Dolby D/Dolby D +/Dolby TrueHD
¾
DTS/DTS-HD
¾
MPEG Audio
Select the audio signal to output.
≥
Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥
If you do not make proper settings the audio
may be static or noisy.
Picture
Automatic
Automatically selects the type
of picture shown.
Field
Select if jittering occurs when
“Automatic” is selected.
Frame
Select if small text or fine
patterns cannot be seen
clearly when “Automatic” is
selected.
Sound
DMP-UB700_EB-TQBS0019.book 30 ページ ２０１６年８月２６日 金曜日 午後１２時２分
