Gettin
g started
TQBS0024
18
When selecting “Single Cable System” in
Step 6.
1 Select the “Single Cable Version”.
• Select the setting that matches the version of
your equipment.
• Check the Single Cable Version setting in
advance.
2 Make the settings of user band.
• User Band
You can set C1 to C8. (If you have selected
“Single Cable 2.0 (JESS)”, a value from C1
to C32 can be set.) Set to a User Band not
used by any other device.
• When only one User Band of the Router is
assigned, set “Tuner 2” to “OFF”. Note that
you will not be able to record two
programmes simultaneously.
• User Band Frequency
Set the User Band Frequency with number
buttons.
• User Band PIN
If the single cable router requires a PIN to
access an user band, enter the PIN.
• For details, read the manual of the single
cable router, etc.
3 Select “Start Auto Setup”, then press [OK].
• Set User Band as required.
• Refer to the operating instructions for your single cable
router for information about each item.
After completing “Easy Setting”, you can continue
with “Easy Network Setting”.
Follow the on-screen instructions to establish
your connection settings.
Select “Wired” or “Wireless”, then press [OK].
LAN cable connection (“Wired”)
Follow the on-screen instructions to apply your
connection settings.
Wireless LAN connection (“Wireless”)
Before beginning wireless connection setup
• Obtain your network name (SSID
§
1
).
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
• The default SSID
§
1
, Password (Key) etc., may
be printed on the router.
Confirm
Select
RETURN
Single Cable 2.0 (JESS)
Single Cable
Single Cable Version
Single Cable - EN50494:
Allow up to 8 user bands
Single Cable 2.0 (JESS) - EN50607:
Allow up to 32 user bands
Unicable II
e.g.,
User Band Settings
OK
Select
RETURN
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner 1
C1
1284 MHz
User Band Frequency
Off
User Band PIN
User Band
Tuner 2
C2
1400 MHz
User Band Frequency
Off
User Band PIN
User Band
Easy Network Setting
OK
RETURN
Easy Network Setting
Select a connection mode.
Wired
Wireless
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
e.g.,
DMR-BST&BCT765&760EG_eng.book 18 ページ ２０１７年３月２日 木曜日 午後６時３５分
