Recording
TQBS0024
31
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby mode.
1 Press [OPTION].
2 Select “Recording Mode”.
3 Select the recording mode (picture quality),
then press [OK].
• Recording mode (Picture Quality) (
>
23)
• The recording mode (picture quality) set
here is used as the default value for the
next recording.
To change the recording mode (picture
quality) after recording in DR mode (
>
56,
“Picture Quality Change”)
To check to see if the recording mode (picture
quality) change is finished (
>
57)
To cancel the recording mode (picture quality)
change (
>
56)
• Programmes in the original picture quality (DR mode) will
be deleted after their recording mode (picture quality) is
changed.
• It takes about the same amount of time as recording to
change the recording mode (picture quality).
• When the HDD does not have enough remaining space, the
recording mode (picture quality) change function does not
operate.
• A recording mode (picture quality) change stops when this
unit is turned on. The process will start from the beginning
again after the unit is switched to standby mode.
• Even if you change the recording mode (picture quality) of a
programme, its audio and subtitle settings will remain the
same as those at the start of recording.
• When the recording mode (picture quality) of a programme
recorded in DR mode is changed, teletext recorded with the
programme will be lost.
Press [STATUS
].
Press [
∫
].
When recording one programme:
If the following screen appears
Select “Yes”, then press [OK].
To change the recording mode (picture
quality)
HG
HX
HE
HL
HM
XP
SP
LP
DR(Original)
Recording Mode ( Picture Quality )
OK
RETURN
HDD Remain
(DR)
m
h
High
Definition
Standard
Definition
Operation during Recording
To check the recording programme
e.g., While recording two programmes simultaneously
To stop recording
When recording two programmes:
Following screen appears
1 Select the programme, then press [OK].
2 Select “Yes”, then press [OK].
REC2
HDD
REC1/OTR AUTO
5
Recording programme
displayed on the TV
Recording programme not displayed on the TV
Stop Recording
Yes
No
Recording of this programme is in progress.
Stop this recording ?
OK
RETURN
1
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
OK
RETURN
1
2
DMR-BST&BCT765&760EG_eng.book 31 ページ 2017年3月2日 木曜日 午後6時35分