Setup
TQBS0024
94
Resolution Setting for DLNA
When “Conversion Setting for DLNA” is set
to “On”, select the image quality.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select “Yes”, then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select “Yes”, then press [OK].
• This function cannot be enabled when
“Automatic” is selected in “Registration type for
remote devices”. (
>
above)
• The maximum number of equipment that can be
registered is 16.
DVB-via-IP Server Function
DVB-via-IP Server
Turn on/off the DVB-via-IP Server
function.
• If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (
>
95)
Network Function Priority
It is not possible to use the DVB-via-IP
Server function and another network
function (Network Service / Home
Network) simultaneously.
Priority can be given to either of these
functions. (
>
73)
• DVB-via-IP Server:
Priority is given to the DVB-via-IP Server
function. When using the DVB-via-IP
Server function, it is not possible to use
another network function on this unit.
Conversely, when using the network
function on this unit, it is not possible to
use DVB-via-IP Server function.
• Network Service / Home Network:
Priority is given to other network
functions. When using the DVB-via-IP
Server function, if you use another
network function on this unit, the former
stops. Conversely, when using another
network function on this unit, it is not
possible to use the DVB-via-IP Server
function.
DMR-BST&BCT765&760EG_eng.book 94 ページ 2017年3月2日 木曜日 午後6時35分