Gettin
g started
TQBS0024
11
Connection
3D programmes or 4K images can be played back when this unit is connected to 3D or 4K
compatible terminal of a 3D or 4K compatible TV.
• Keep the RF coaxial cables as far away as possible from other cables.
• Switchover from DVB-T to DVB-T2 is scheduled. (DVB-T2 is not supported by this unit.)
For details, check the relevant announcements made by broadcast stations. (Germany only)
• Before making any connections, please disconnect all the units from AC power.
(Connect the AC mains lead after making all connections.)
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (
>
104)
[BCT765]
[BCT760]
Basic connections
HDMI
VHF/UHF
RF IN
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
To the CATV terminal or the Aerial
CATV coaxial cable or Aerial cable
RF coaxial cable
(supplied)
DMR-BST&BCT765&760EG_eng.book 11 ページ 2017年3月2日 木曜日 午後6時35分