Gettin
g started
TQBS0024
16
The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
• In these operating instructions,
[DVB-C]
: indicates features applicable to digital
cable broadcasts (DVB-C).
[DVB-T]
: indicates features applicable to digital
terrestrial broadcasts (DVB-T).
• This unit can receive only one of the two
services at a time.
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Set “TV Signal Selection”.
• Select “Digital Cable Channels” or “Digital
Terrestrial Channels”, then press [OK].
[BCT765]
[BCT760]
Easy Setting
2
Press [
Í
] on the remote control or [
Í
/I] on
this unit.
• The Easy Setting will start at the initial
power on.
1
[DVB-C]
Select the channel number allocation,
then press [OK].
• For Germany and Austria:
We recommend selecting “Preset
Channel Number”.
• For Switzerland:
We recommend selecting “Operator’s
Channel Number ( LCN )”.
• To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. (
>
85)
• If channel is not found, restart Auto Setup in Basic
Settings menu. (
>
85)
• Switchover from DVB-T to DVB-T2 is scheduled.
(DVB-T2 is not supported by this unit.)
For details, check the relevant announcements
made by broadcast stations. (Germany only)
2
[DVB-C]
Select “Start Auto Setup”, then press
[OK].
• Scan Mode
Quick
Full
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
DMR-BST&BCT765&760EG_eng.book 16 ページ 2017年3月2日 木曜日 午後6時35分