Watching broa
dcasts
TQBS0024
27
When “
” appears in channel information
Press [STTL
].
• Press again to hide subtitle.
• Some subtitle contents can be displayed using Teletext.
(
>
below)
When “
” appears in channel information
2
Use [
3
,
4
,
2
,
1
], number buttons or colour
buttons, etc. according to on-screen
instructions.
• You can change the display mode. (
>
91, Teletext)
Press [AUDIO].
• Audio will switch according to the contents of
the programme every time it is pressed.
When a programme includes audio signals etc.,
you can select signals.
1
Press [OPTION].
2
Select “Digital TV Menu”, then press [OK].
3
Select “Multi Audio” or “Sub Channel”, then
press [OK].
4
Select the item.
Enter the PIN with the number buttons by
following the on-screen instructions.
• If you decide on a PIN, make a note it in case
you forgot it.
• PIN (except CAM’s) can be changed via “PIN
Entry”. (
>
96)
• For CAM’s PIN, refer to your CAM’s operating
instructions.
To watch an encrypted broadcast, insert the CI
module into the CI slot. (
>
9)
• Set “Common Interface”. (
>
92)
To use the data service function (Catch Up
Service), network connection and settings are
necessary. (
>
15, 18)
• Set “HbbTV Setting” to “On”. (
>
86)
To select the data service, follow the on-screen
instructions. (e.g., “Press colour button.” etc.)
• Operations may vary depending on the broadcaster.
• For information about other disclaimers.
(
>
107, About Network Service in “Disclaimer”)
To show subtitle
To change subtitle language
1 Press [OPTION].
2 Select “Subtitle Language” in “Digital TV
Menu”, then press [OK].
3 Select the desired language.
• Press [EXIT
] to exit the screen.
To show the Teletext
1
Press [TEXT
].
• When the Teletext of data service is
displayed, press [TEXT
] again.
Switching audio
To select the contents in the broadcast
If this unit requests a PIN
If encrypted channels do not appear
To use data service (Catch Up TV)
DMR-BST&BCT765&760EG_eng.book 27 ページ ２０１７年３月２日 木曜日 午後６時３５分
