Edit
ing video
TQBS0024
56
[HDD]
[USB_HDD]
The Picture Quality Change function changes the
recording mode of programmes in DR mode or
AVCHD format. Programmes will be smaller in
size after their recording mode is changed. It
takes about the same amount of time as
recording to change the mode.
To cancel a picture quality change if you
selected “Now”
Press and hold [RETURN
] for more than
3 seconds.
To cancel a picture quality change if you
selected “During standby”
After performing steps 1–2 (
>
54, Editing
recorded programmes)
1 Select “Picture Quality Change” in “Edit”, then
press [OK].
2 Select “Yes”, then press [OK].
Picture Quality Change
1
On the Video Menu screen (
>
54):
Select the programme in DR mode or the
AVCHD content.
• Multiple selection (
>
54)
2
Press [OPTION].
3
Select “Picture Quality Change” in “Edit”, then
press [OK].
e.g.,
4
Set the picture quality change options, then
press [OK].
Picture Quality (
>
23):
•
[USB_HDD]
You cannot select XP, SP and LP
mode.
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the programme.
• Off
Subtitle will not be recorded.
Timing:
• Now
A picture quality change starts immediately
after step 6.
• Time recordings cannot be made while a
picture quality change is in progress.
• If an encrypted programme (
) is
included, “Now” cannot be selected.
• During standby
A picture quality change starts after the unit
is switched to standby mode.
Picture Quality Change
Change picture quality of the selected programme.
Please select picture quality and other options, then press OK.
RETURN
Subtitles
Off
Picture Quality
HL -- Longer Play
Timing
During standby
OK
5
Select the item below, then press [OK].
Delete:
The original programme will be deleted to save
the storage capacity of the HDD after the
picture quality is changed.
Keep:
The original programme is retained even after
the picture quality is changed.
• The original programme will be deleted after
Picture Quality Change, if the selected
programme is indicated with
. (
>
10)
6 If you have selected “Now”:
Select “Start”, then press [OK].
If you have selected “During standby”:
Press [OK].
• Picture quality change will be performed after
the unit is switched to standby mode.
“COPY” or “CONV” on the front panel display
stay lit while a picture quality change is in
progress.
• The picture quality of encrypted
programmes (
) will be changed after
they are decrypted.
DMR-BST&BCT765&760EG_eng.book 56 ページ ２０１７年３月２日 木曜日 午後６時３５分
