Troubleshooting
VQT4W69
109
No sound.
Distorted sound.
• Check the connections. (
>
16)
• Check the settings of the connected TV, etc.
• Press [AUDIO] to select the audio. (
>
29, 47)
• To output audio from a device connected with an
HDMI cable, set “HDMI Audio Output” to “On”.
(
>
84, 95)
Cannot change audio channel.
• You cannot change the audio channel if “Digital
Audio Output” is set to “Bitstream” (
>
92)
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
• You cannot record to the disc by pressing the
[REC
¥
] or timer recording.
• The disc is protected. (
>
102)
•
[DVD-R]
[DVD-RW]
[+R]
[+RW]
Since it will copy to
HDD temporarily, copying is not possible if there
is insufficient available capacity on the HDD.
•
[DVD-R]
[DVD-RW]
[+R]
[+RW]
Copying or editing
may not be possible on these discs after
ejecting and loading the disc or switching the
unit on or to standby mode for approximately
30 times after being copied to.
• This unit cannot record/copy NTSC signals to
discs that already have PAL signal recordings.
A part or whole of a recorded title has been
lost.
• If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable. We cannot
offer any guarantee regarding lost programmes.
An unusually loud sound is coming from the
rotating disc.
• If you want copy to perform more quietly, select
“Normal ( Silent )” in “BD / DVD Speed for High
Speed Copy”. (
>
84, 90)
Sound
Recording, timer recording and
copying
Timer recording does not work properly.
• Failed timer recordings are displayed in grey
with
on the Timer Recording screen. (
>
39)
When you programme a timer recording, check
the screen icons. If “!” is displayed, this timer
programme may not be recorded because:
- there is not enough space left.
- the number of possible titles has reached its
maximum.
- programmes are deactivated, etc.
• If your CAM requires a PIN for timer recording,
you need to enter PIN in advance. (
>
90, PIN
Entry for Decrypt Recording)
Auto Renewal Recording does not work
properly.
• The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as DIRECT NAVIGATOR is
displayed
Instead, the programme will be saved as a
separate programme and that will be
overwritten.
DMR-BST835_735_730EG_eng.book 109 ページ ２０１３年７月１日 月曜日 午後４時５１分
