20
U99
Hang-up
Displayed when communication error has
occurred between Main microprocessor
and Timer microprocessor.
No display
Displayed is left until the [POWER]
key is pressed.
H19
Inoperative fan motor
When inoperative fan motor is detected
after powered on, the power is turned off
automatically.
The event is saved in memory.
No display
No display
F00
No error information
Initial setting for error code in memory
(Error code Initialization is possible with
error code initialization and main unit initial-
ization.)
No display
No display
F58
Drive hardware error
When drive unit error is detected, the event
is saved in memory.
No display
No display
F34
Initialization error when main
microprocessor is started up
for program recording
When initialization error is detected after
starting up main microprocessor for pro-
gram recording, the power is turned off
automatically.
The event is saved in memory.
No display
No display
F74
HDMI Device Key Communica-
tion error.
HDMI connection could not be authenti-
cated due to a transfer malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C doesn't oper-
ate normally.
• When device key information recorded
is damaged.
No display
F75
HDMI Device Key Information
error
HDMI connection could not be authenti-
cated due to an internal data malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C doesn't oper-
ate normally.
• When device key information recorded
is damaged.
No display
UNSUP-
PORT
Unsupported disc error
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
“This disc is
incompatible.”
Display for 5 seconds.
The character indication flows side-
ways.
NO READ Disc read error
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
“Cannot read.
Please check the
disc.”
HARD
ERR
Drive error
The drive detected a hard error.
“
BD drive error.
”
Display for 5 seconds.
The character indication flows side-
ways.
SELF
CHECK
Restoration operation
Since the power cord fell out during a
power failure or operation, it is under resto-
ration operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there
is the possibility that defective Digital P.C.B.
/ BD drive.
No display
The character indication flows side-
ways.
PLEASE
WAIT
Unit is in termination process
Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON,
it is displayed in restoration operation for
AC off.
No display
The character indication flows side-
ways.
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
Summary of Contents for DMR-BW500EF
