Co
nveni
e
nt
f
unct
ions
VQT3C14
90
Changing the unit’s settings
∫
Clock
If the time is not set correctly, use the settings listed in the
method below.
≥
Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to “Off” and
perform “Manual setting”.
≥
Region Selection
Select the region where you live to adjust the standard
time.
≥
The time contained in the broadcast signal is UTC
(Universal time, coordinated).
≥
Daylight Saving Time
Select time offset from the standard time for Summer
Time.
≥
If there is a gap between displayed time and actual time,
set this function.
≥
Manual setting
1
Select “Off” of “Automatic”, then press [OK].
2
Select the item you want to change.
3
Change the setting.
4
Press [OK] when you have finished the settings.
∫
PIN Entry
You can set/change the PIN. (
>
78)
∫
System Update
¾
Software Update in Standby
When you set this unit to standby mode, software
(firmware) updates (
>
92) are downloaded
automatically at the time you have specified.
¾
Software Update Now ( Broadcast )
Software of this unit will be updated from broadcasts if
update information is detected. (
>
92)
¾
Software Update Now ( Internet )
Software of this unit will be updated from Internet if
update information is detected. (
>
92)
¾
Software Licence
Information about the software licence is displayed.
∫
System Information
Display software (firmware), HDAVI Control version and
Wireless Module version (When using wireless connection
only) of this unit.
∫
DivX Registration
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content (
>
101).
∫
Initialize
¾
Shipping Condition
All the settings except for basic settings return to the
factory preset. The timer recording programmes are
also cancelled.
¾
Default Settings
All the settings other than the tuning settings, clock
settings, disc language settings, rating PIN, remote
control code, network settings etc. return to the factory
presets.
Clock
Time
Date
Daylight Saving Time
Region Selection
Automatic
Please set the clock.
OK: access RETURN: leave
OK
RETURN
12
00
10 AM
NSW / ACT
Automatic
On
1
1
2011
Others
System Update
System Update
Software Update in Standby
Enlgish
Software Update Now ( Broadcast )
Software Update Now ( Internet )
Software Licence
Others
Initialize
Initialize
Shipping Condition
Default Settings
DMRBWT800&700GL_eng.book 90 ページ 2011年2月14日 月曜日 午後3時50分