Convenient functions
SQT1119
80
Basic Settings
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use “BD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
Clock
If the time is not set correctly, use the settings
listed in the method below.
• Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
Owner ID
In order to prevent another person from using this
unit if it is stolen, you can set a PIN and input
your personal information (NAME, HOUSE NO,
POSTCODE).
Once the PIN has been set, you cannot return
to the factory preset. Make sure not to forget
this.
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number buttons.
2 Enter the new 4-digit PIN with the number
buttons.
• Make a note of PIN in case you forget it.
e.g.,
3 Press [OK].
OK
Remember the PIN.
PIN Entry
0
0
0
0
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (
>
81) are
downloaded automatically at the time you
have specified.
Software Update Now ( Broadcast )
Refer to “Software (Firmware) Update”.
(
>
81)
Software Update Now ( Internet )
Refer to “Software (Firmware) Update”.
(
>
81)
Software Licence
Information about the software licence is
displayed.
System Information
Display Software (firmware) version and
Wireless Module version (When using wireless
connection only) of this unit.
Initialize
Shipping Condition
All the settings except for some settings
return to the factory preset.
• The timer recording programmes are also
cancelled.
• The device password is also initialized.
(
>
77)
Default Settings
All the settings other than the tuning settings,
clock settings, disc language settings,
parental control settings, remote control
code, etc. return to the factory presets.
DMR-BWT850EB_eng.book 80 ページ ２０１５年９月１１日 金曜日 午後５時４０分
