14
RQT7394
Ge
tt
in
g s
ta
rte
d
STEP
3
Set up to match your television and remote control
You do not have to change the setting when connected to a 4:3
standard aspect television that is not compatible with progressive
output (
➡
page 69).
1
Press [SETUP].
2
Press [
3
,
4
] to select “TV Screen”
and press [
1
].
3
Press [
3
,
4
] to select “TV Type” and
press [ENTER].
≥
Aspect 4:3/Aspect 16:9:
≥
480p/480i:
Select “480p” if the television is compatible with
progressive output.
4
Press [
3
,
4
] to select the item and
press [ENTER].
You can configure the remote control TV operation buttons to turn
the television on/off, change the television input mode, select the
television channel and change the television volume.
Point the remote control at the television
While pressing [
Í
POWER TV], enter the
code with the numbered buttons.
e.g., 01: [0]
➡
[1]
Manufacturer and Code No.
Test by turning on the television and changing channels. Repeat
the procedure until you find the code that allows correct operation.
≥
If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
Use “1”, the factory set code, under normal circumstances.
1
Press [SETUP].
2
Press [
3
,
4
] to select “Set Up” and
press [
1
].
3
Press [
3
,
4
] to select “Remote
Control Code” and press [ENTER].
4
Press [
3
,
4
] to select the code (1, 2,
or 3) and press [ENTER].
5
To change the code on the remote control
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
6
Press [ENTER].
∫
When the following indicator appears on the
unit’s display
Change the code on the remote control to match the main unit’s
(
➡
step 5).
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].
Selecting television type
4:3 standard aspect
television
16:9 widescreen
television
POWER
VOLUME
CH
INPUT SELECT
DVD POWER
TV
TV/VIDEO
1
HDD
SD/PC
DVD
2
3
4
5
6
7
8
0
9
CM SKIP
AUDIO
PAGE
CH
CANCEL
VCR Plus+
SKIP
STOP
PAUSE
PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER
SETUP
Info
PROG/CHECK
TV GUIDE
REC MODE
ERASE
REC
STATUS
TIME SLIP
DISPLAY
DUBBING
3
,
4
,
2
,
1
ENTER
RETURN
SETUP
Numbered
buttons
TV operation
buttons
SETUP
Set Up
Disc
Video
Audio
Network
Display
TV Type
Aspect 4:3 & 480i
Aspect 4:3 & 480p
TV Screen
Channel
Aspect 16:9 & 480p
Aspect 16:9 & 480i
4:3
16:9
Television operation
Panasonic
National
QUASAR
01, 02
PHILIPS (RC-5)
03
RCA
05
SAMSUNG
14, 18, 19
FISHER
10
SANYO
10
GE
05
SHARP
06, 07
GOLDSTAR
15, 16, 17
SONY
08
HITACHI
12
SYLVANIA
03
JVC
11
THOMSON
05
LG
15, 16, 17
TOSHIBA
09
MAGNAVOX
03
ZENITH
04
MITSUBISHI
13
When other Panasonic products
respond to this remote control
SETUP
Disc
Video
Remote Control Code
Channel
Set Up
Pres
s “
±
” and “ENTER” together
for more than 2 seconds on the remote.
The unit’s remote control code
7394en.book Page 14 Wednesday, March 30, 2005 9:45 AM