Various Settings
57
To see these displays, set the “OSD” item in the “VHS MENU” to
“ON” (
l
56).
Press [STATUS].
The time and operation details appear on the screen for about 5
seconds.
Note:
≥
These displays do not appear when paused or during slow play.
≥
The on-screen display may be distorted depending on the playback
tape or the input signal.
When a stereo and/or SAP broadcast is received, “STEREO” or
“SAP” light to show the type of broadcast.
∫
When playing a tape:
To change the audio, press [AUDIO].
The audio changes as follows:
Stereo
>
L
>
R
>
Normal audio track
>
Stereo
∫
While watching TV:
You cannot change audio.
When a stereo broadcast or SAP broadcast is recorded and played
back on this unit, stereo sound will be automatically selected in the
case of a stereo broadcast and SAP sound will be automatically
selected in the case of a dual-sound broadcast (Mono and SAP or
Stereo and SAP).
≥
The wrong choice may be made if the program is played back from
an interim point. (In a case like this, press [AUDIO] and select the
right sound only in playback.)
≥
The function will not work with a cassette which has been recorded
using external equipment.
Preparation
≥
Press [VHS].
Various on-screen display indications
1
Channel display
2
STEREO/SAP indication
Indicates when a program is broadcast in stereo or SAP.
3
L and R indicators (appears only in playback)
The Left (L) and Right (R) indicators show which sound mode
is selected as follows:
Stereo: Both the L and R indicators appear.
L:
The L indicator appears.
R:
The R indicator appears.
Normal: Neither the L nor R indicator appears.
4
Operation status display
5
Shows the time and tape counter
Pressing [STATUS] once makes the on-screen display
appear. After that, press the button repeatedly to change the
display as follows:
Present time
>
Tape counter
>
Remaining tape
time
>
Present time
during Index search: “S 01” to “S 20” is displayed.
during Jet Rewind:
“J. REW” is displayed.
≥
Press [CANCEL/RESET,
¢
] to reset the tape counter
(elapsed time) to “0:00.00”.
The tape counter is automatically reset to “0:00.00” when
inserting a video cassette.
≥
The remaining time is approximate. It will be incorrect if you
set the wrong tape time in the “TAPE SELECT” item in the
“VHS MENU” and if the tape is of poor quality.
6
Cassette-in indicator
Shows whether you have loaded a video cassette.
7
Tape speed indicator (
l
51
)
CH 1
STEREO
L R
0:00.22
;¥
SP
1
1
2 3
4
5
6
7
Changing audio
Auto Bilingual Choice Function
VHS
PP-Sample.book 57 ページ ２００４年４月８日 木曜日 午後３時４５分
