19
7.1.2.
Special Modes Setting
HARD
ERR
Drive error
The drive detected a hard error.
“
DVD drive error.
”
Display for 5 seconds.
The character indication flows
sideways.
SELF
CHECK
Restoration operation
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
RAM drive.
No display
The character indication flows
sideways.
PLEASE
WAIT
Unit is in termination process
Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON, it
is displayed in restoration operation for AC
off.
No display
The character indication flows
sideways.
UNFOR-
MAT
Unformatted disc error
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
The character indication flows
sideways.
IR ERR
IR communication error
[IR ERR] is displayed when communication
between Timer microprocessor and IR micro-
processor fails.
No display
No REC
Recording is impossible
[No REC] is displayed when recording is
impossible due to the defect, dirt or wound of
media.
No display
HDD
ERROR
[HDD ERR] is displayed when
start up of HDD was failed.
(Except error of setting of
Power on Stand-by)
a) When normal start up was failed.
b) When start up at HDD boot was failed.
c) When start up from state of P-OFF was
failed.
d) When start up from state of HDD SLEEP
was failed.
[HDD ERR] is displayed when above each
start up of HDD was failed.
*In case b), tray opens automatically and
[HDDERR] is displayed until version up disc is
inserted.
No display
HDD
NG
Power on Stand-by setting
error
[HDD NG] is displayed when power on Stand-
by setting of HDD is NG or when HDD which
power on Stand-by is not set to is used.
Please try to replace HDD with genuine HDD
as service parts.
No display
Item
FL display
Key operation
Mode name
Description
Front Key
TEST Mode
*All the main unit's parameters (include tuner)
are initialized.
Press [STOP], [CH UP] and [OPEN/
CLOSE] keys simultaneously for
five seconds when power is off.
Rating password
The audiovisual level setting password is ini-
tialized to “Level 8”.
Open the tray, set DRIVE SELECT
to DVD, and press [REC] and
[PLAY] simultaneously for 5 sec-
onds.
Service Mode
Setting every kind of modes for servicing.
*Details are described in “
7.1.3. Service
Modes at a glance
”.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
Summary of Contents for DMR-EH49ECA
