24
HDD READ SEEK
Inspection
Inspecting seek time of HSS to inspect perfor-
mance.
At start
The [*] sign is added every 20 sec-
onds while inspecting.
Two digits on the right side are the
progress level of the inspection
(The unit is %).
Example on the way of inspection:
When HDD is OK after inspection:
(NG is displayed when error is
excluding o )
(Transfer rate is calculated from the
AV scanning result, and when it is
less than 35Mbps, NG is displayed.)
$: [X] is displayed when seek time is
over 270msec., there is error or
transfer rate is NG.
Position at $ is space when exclud-
ing those.
##: Number of data of over
100msec. and less than 270msec.
When it is over 100, [99] is dis-
played.
When the number is less than 5, we
judge it normal.
Press [3] [1] in service mode.
* When canceling the inspection
mode while executing, do “forced
power-off”.
Method:
Press [POWER] key more than 4
seconds.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
Summary of Contents for DMR-EH49ECA
