Setup with Q-Link
Download from TV using
You can download the tuning positions from the TV set. This unit Auto Clock Setting
function synchronizes the time when the TV channel that is broadcasting time and date
information is tuned.
!
Switch your television on and select the AV channel.
!
Switch the device on using the
Stand-by/on switch
.
The unit starts the station transfer. The station transfer is complete when the menu Owner
ID appears.
(Registered trademark of Panasonic)
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-Setup
automatically. In this case you can re-start Auto-Setup again. See page 72.
If you want to cancel Auto-Setup before it has finished, press the
RETURN
button.
You can restart Auto-Setup again. See page 72.
!
Press
to set the correct time and date and press
ENTER
to finish this setting.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Mind that a wrong date or time will influence the programmed recording of TV
programmes (don't forget to change summer time and winter time).
You can complete the Owner ID now or skip this step and do it later. To do it later, press
the
RETURN
button. Your DVD Recorder is now ready to use.
!
To set the Owner ID now, use and press the
Numeric
buttons or
to enter a
four-digit PIN number. Press , to correct the digit.
!
Make sure that you will remember the PIN number (make a note of it).
!
Press the
ENTER
button twice to confirm.
!
Enter the [Name], [House No] and [Postcode] in the same way, using
.
!
Press the
ENTER
button to confirm each entry.
!
Press the
RETURN
button to leave the Owner ID screen.
!
You will now see the TV picture. Your DVD Recorder is now ready to use.
Owner ID
Note that you must first perform a station search. If you have a Panasonic television,
[Download from TV] will be displayed automatically at the beginning of the station transfer.
16
Pos
4
Download from TV
RETURN
Download in progress, please wait.
RETURN: to abort
Clock
Off
Automatic
0
00
00
1
1
2005
:
:
.
.
Time
Date
CHANGE
ENTER
RETURN
Clock cannot be set automatically.
Please set the clock manually.
ENTER: store RETURN: leave
SELECT
0
9
No
Owner ID
RETURN
Name
House No.
Postcode
PIN number
* * * *
RETURN : leave
* * * * * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
