36
RQT9193
Linked operations with the TV (VIERA Link “HDAVI Control
TM
”/Q Link)
You can enjoy linked operations with the TV and receiver by using
“HDAVI Control” or Q Link.
Preparation
1
Connect this unit to your TV using an HDMI cable and a fully
wired 21-pin Scart cable (
>
7), or to your receiver using an HDMI
cable (
>
70).
2
Set “VIERA Link” to “On” (
>
65). (The default setting is “On”.)
3
Set the “HDAVI Control” operations on the connected equipment
(e.g., TV).
≥
Set the input channel on VIERA to suit the terminal to be
used as “HDAVI Control”.
4
Turn on all “HDAVI Control” compatible equipment and select this
unit’s input channel on the connected TV so that the “HDAVI
Control” function works properly.
Also when the connection or settings are changed, repeat
this procedure.
Preparation
≥
Connect this unit to your TV with a fully wired 21-pin Scart cable
(
>
6).
For your reference
The following systems from other manufacturers have similar
function to Q Link from Panasonic.
For details, refer to your television’s operating instructions or consult
your dealer.
≥
Q Link (registered trademark of Panasonic)
≥
DATA LOGIC (registered trademark of Metz)
≥
Easy Link (registered trademark of Philips)
≥
Megalogic (registered trademark of Grundig)
≥
SMARTLINK (registered trademark of Sony)
What you can do with “HDAVI Control” and Q Link
§
1
This button is available only when this unit is on.
§
2
When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents
from where playback started.
In this case, press [
:
] or [
6
] to go back to where playback started.
§
3
This function is available with the TV which has “
HDAVI Control 3
” function.
[Note]
≥
These functions may not work normally depending on the equipment condition.
≥
About “HDAVI Control” function, read the manual of the connected equipment (e.g., TV) too.
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function that
offers linked operations of this unit, and a Panasonic TV
(VIERA) or receiver under “HDAVI Control”. You can use this
function by connecting the equipment with the HDMI cable.
See the operating instructions for connected equipment for
operational details.
≥
VIERA Link “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known as
HDMI CEC (Consumer Electronics Control), is a unique function
that we have developed and added. As such, its operation with
other manufacturers’ equipment that supports HDMI CEC
cannot be guaranteed.
≥
This unit supports “HDAVI Control 3” function.
“HDAVI Control 3” is the newest standard (current as of
December, 2007) for Panasonic’s HDAVI Control compatible
equipment. This standard is compatible with Panasonic’s
conventional HDAVI equipment.
≥
Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
What is Q Link?
Q Link is a convenient function that offers linked operations of
this unit and a Panasonic TV. You can use this function by
connecting the equipment with a fully wired 21-pin Scart cable.
(When the TV is on)
Easy playback
[VIERA]Link]
[Q]Link]
When the TV is on and the following operations are performed, the TV’s input will automatically switch to HDMI input
mode (
[VIERA]Link]
) or AV input mode (
[Q]Link]
) and the TV displays the corresponding action.
(Picture or sound may not be available for the first few seconds.)
Press [FUNCTION MENU]
§
1
, [
1
] (PLAY)
§
2
, [DIRECT NAVIGATOR], [GUIDE], [PROG/CHECK] etc.
(When the TV is off)
Power on link
[VIERA]Link]
[Q]Link]
When the TV is off and the following operations are performed, the TV will automatically turn on and displays the
corresponding action.
(Picture or sound may not be available for the first few seconds.)
Press [FUNCTION MENU]
§
1
, [
1
] (PLAY)
§
2
, [DIRECT NAVIGATOR], [GUIDE], [PROG/CHECK] etc.
≥
[DVD-V]
[CD]
[VCD]
SVCD
and
MP3
The TV is automatically turned on when you insert the discs.
Power off link
[VIERA]Link]
[Q]Link]
When you set the TV to standby mode, the unit is also automatically set to standby mode. The unit is automatically
set to standby mode even if the FUNCTION MENU screen etc. is displayed during playback or when the unit set to a
timer recording.
Even if the TV is set to standby mode, the unit will not be set to standby mode at the same time when recording,
copying, finalising etc.
≥
When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, the receiver
will also turn off.
Direct TV
Recording
[VIERA]Link]
§
3
[Q]Link]
This function allows you to immediately start recording the programme that you are viewing on the TV.
Press and hold [
¥
DIRECT TV REC] for 1 second.
Recording starts.
≥
The titles are recorded to the HDD.
To stop recording
Press [
∫
].
DMR-EX81SEG_RQT9193.book 36 ページ 2008年7月28日 月曜日 午後5時29分