80
RQT8866
The display is dim.
Change “FL Display” in the Setup menu.
66
“0:00” is fl ashing on the unit’s
display.
Set the clock.
13
The displayed time of this unit is
different from the actual recording
time or MP3 recording time.
Times shown may disagree with actual times.
−
[-R] [-R\DL] [+R] [+R]DL]
The remaining capacity does not increase even if
titles are deleted.
−
Available space on a DVD-RW (DVD-Video format) or +RW disc increases
when you delete the last title (space may increase slightly when you delete
other titles).
−
If you record or edit about 200 times or more, the remaining capacity
of DVD-R, DVD-R DL, +R, and +R DL is reduced and then recording or
editing may be disabled (for the second layer on DVD-R DL and +R DL,
this happens after about 60 times).
−
The time during searching may not be displayed accurately.
−
The clock is not correct.
Under adverse reception conditions, etc., the automatic time correction
function may not work.
In this case, “Automatic” is automatically turned to “Off”. If re-setting the
Auto Clock Setting does not work, set the time manually.
13
Compared to the actual recorded
time, the elapsed time displayed is
less.
(Only when recording in NTSC)
The displayed recording/play time is converted from the number of frames
at 29.97 frames (equal to 0.999 seconds) to one second. There will be a
slight difference between the time displayed and the actual elapsed time
(e.g., actual one-hour elapsed time may display as approximately 59
minutes 56 seconds). This does not affect the recording.
−
The following does not indicate a problem with the unit:
Regular disc rotating sound.
Poor reception due to atmospheric conditions.
Image disturbance during search.
Periodic interruptions to the reception due to satellite broadcasting breaks.
A sound is heard when the HDD goes into energy save mode, or operations are slow to respond in energy save mode.
Operations not working due to a poor-quality disc. (Try again using a Panasonic disc.)
The unit freezing due to the activation of one of its safety devices (
¼
79, To restore the unit if it freezes).
When the HDD has been automatically placed in the energy save mode (
¼
6), or the unit is turned on or off, there may
be an unexpected sound. This does not indicate a problem with this unit.
No power.
The unit does not turn on pressing
[
DVD].
Insert the AC mains lead securely into a known active household mains
socket.
Linked timer recordings with external equipment is in recording standby
(“EXT-L” on the unit’s display blinks when [
DVD] is pressed). Press [EXT
LINK] to cancel the recording standby.
10, 11,
70
23
The unit switches to standby mode.
One of the unit’s safety devices is activated. Press [
/I] on the main unit to
turn the unit on.
−
The unit is turned off automatically.
If you connected this unit to an “HDAVI Control” compatible TV with an
HDMI cable, or connected this unit to a Q Link-compatible TV with a fully
wired 21-pin Scart cable, this unit will be automatically set to standby
mode when the TV is set to standby mode.
40
General Issues
Power
General Issues
Displays
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions
indicated in the chart do not solve the problem, consult your dealer for instructions.
Page
Page
Troubleshooting Guide
DMR-EX77̲87EB.indb 80
DMR-EX77̲87EB.indb 80
2007/03/20 20:28:35
2007/03/20 20:28:35
