18
RQT9046
Scheduled Recording
Refer to “Advanced Scheduled Recording” (
➔
23, 24) for detailed information on scheduled recording.
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
RAM
If the disc is protected, release protection (
➔
44).
Insert a disc with enough remaining blank space.
Confirm that the clock on the unit’s display is set to the correct time.
If connected via a cable box or satellite receiver, set channel on that
equipment before scheduled recording starts.
•
•
•
•
•
CANCEL
S SUB MENU
Timer Off A
Schedule List
Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP
DVD
Channel
No
Press OK to set new schedule.
Date
On
New Scheduled Recording
Off
Mode Check
OK
e
,
r
to select “New Scheduled Recording”, then
w
,
q
to move through the items and
e
,
r
to set
the items.
Channel/Input
TV Station/External Input
To select a favorite channel
(To set Favorite Channels, see page 15.)
1. Press [SUB MENU].
2. Press [
e
,
r
] to select “Change Surf Mode”, then press [OK].
3. Press [
e
,
r
] to select “Favorite”, then press [OK].
–
Date/Frequency
You can set a daily or weekly program.
–
On (start time) / Off (end time)
Hold button to change in 30-minute increments.
–
Mode
Recording mode, see page 21
–
Name
Press [OK], see page 33.
–
To delete all items
1. Press [SUB MENU].
2. Press [
e
,
r
] to select “Delete”, then press [OK].
Channel, Caption
Preview of selected
channel
SCHEDULED
RECORDING
Channel/
Input
Date/
Frequency
--------
On
--:-- --
Off
--:-- --
Mode
--
OK
Name
Number
--
0
9
4-1
4-1 KPO-SD
Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP
DVD
Cancel
Set Channel/Input.
S SUB MENU
Surf Mode: All
−
Repeat steps 2
−
4 to program other recordings.
when you have finished programming.
“
z
” lights on the unit’s display.
Scheduled recording can be started only when the unit is turned off.
–
–
Notes
To prevent recording errors
Set a scheduled recording period slightly
longer than the actual program (to make
sure the program is recorded in full).
Be sure to perform step 5 before the
scheduled recording time. When the
unit is turned off, “
z
” lights on the unit’s
display to indicate scheduled recording
standby has been activated.
“
z
” flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
When scheduled recordings are set to
start one immediately after another, the
unit cannot record the beginning of the
later program.
If two scheduled recording times overlap
the recording that started first always
has priority. The second recording will
start only after the first recording has
finished.
If two starting times is the same the
recording that programmed later always
has priority.
Depending on the Daylight Savings Time
(DST) settings for this unit, scheduled
recordings may be affected when the
seasons change.
•
•
•
•
•
•
•
Tips
Icons such as “
RAM
” indicate usable
discs. Refer to pages 62 and 63.
DMR-EZ28-P̲PC (RQT9046-P).indb 18
DMR-EZ28-P̲PC (RQT9046-P).indb 18
2007/12/07 15:25:40
2007/12/07 15:25:40
