61
RQT9046
Ref
erence
Using an HDMI (High Definition
Multimedia Interface) Cable
When connected to an HDMI compatible unit, an
uncompressed digital audio and video signal is
transmitted, enabling you to enjoy high quality digital
video and audio with just one cable. When connecting to
an HDMI-compatible HDTV (High Definition Television),
the output can be switched to 1080p, 1080i or 720p HD
video.
Regarding “HDAVI Control” function (
➔
34)
Please use HIGH SPEED HDMI cables that have
the HDMI logo (as shown on the cover).
It is recommended that you use Panasonic’s
HDMI cable.
Recommended part number: RP-CDHG10
(1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.),
RP-CDHG20 (2.0 m/6.6 ft.),
RP-CDHG30 (3.0 m/9.8 ft.),
RP-CDHG50 (5.0 m/16.4 ft.), etc.
Non-HDMI-compliant cables cannot be used.
•
•
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
O
S VIDEO
AV OUT
HDMI IN
Rear of Amplifier or
System Component
Rear of this unit
HDMI OUT
HDMI IN
Rear of TV
HDMI cable
(not included)
Set “HDMI Priority” and “HDMI Audio Output” to “On”
(
➔
54, 55). (The default setting is “On”.)
Notes
If connecting to equipment that is only compatible
with 2 channels output, audio with 3 channels or more
will be down-mixed (
➔
77) and output as 2 channels
(some discs cannot be down-mixed).
For display units compatible with HDCP (High
bandwidth Digital Content Protection) that are
equipped with a digital DVI input terminal (PC
monitors, etc.):
Depending on the unit, images may not display
properly or at all when connecting with a DVI/HDMI
switching cable (audio cannot be output).
•
•
•
If your Television does not have Audio/Video Terminals.
Connecting to a Television
Connect cables in steps and (same as
those on page 8) as follows.
AUDIO IN
R L
VIDEO
IN
RF IN
RF OUT
VHF/UHF
RF IN
step
3
Red White Yellow
Red White Yellow
Rear of TV
Rear of this unit
RF
Modulator
step
2
Cable from the wall
or antenna signal
Connecting to a Television with a Video
Cassette Recorder or a Cable Box or
Satellite Receiver
Connect cables in steps and (same as
those on page 9 or 10) as follows.
AUDIO IN VIDEO
IN
RF IN
RF OUT
step
3
Red White Yellow
Red White Yellow
VHF/UHF
RF IN
Rear of TV
Rear of this unit
Rear of Video Cassette Recorder or
Cable Box or Satellite Receiver
RF Modulator
RF OUT
step
2
R L
Cable from the wall or antenna
signal (Video Cassette
Recorder or Cable Box Only)
•
Using an RF Modulator
DMR-EZ28-P̲PC (RQT9046-P).indb 61
DMR-EZ28-P̲PC (RQT9046-P).indb 61
2007/12/07 15:27:12
2007/12/07 15:27:12