G
etting
sta
rte
d
VQT3F57
14
Settings
7
Set “Power Save” to “On”, “On Timer”
or “Off”, then press [OK].
When the following screen appears, Easy Setting
is complete.
≥
Select “Yes” to proceed to “Network Easy Setting”.
(
>
15)
≥
Select “No” to finish the Easy Setting.
To stop partway
Press [BACK/RETURN
].
To restart set up
1 Press [DRIVE SELECT] to select the HDD drive.
2 Press [FUNCTION MENU].
3 Select “Setup”, then press [OK].
4 Select “Auto Setup” in “Tuning”, then press [OK].
5 Select “Yes”, then press [OK].
To display the Owner ID information on TV
1
While the unit is on, press and hold [OK], the
“Yellow” button and the “Blue” button on the
remote control at the same time for more than
5 seconds.
–“00 RET” is displayed on the unit’s display.
2
Repeatedly press [
1
] (right) on the remote control
until “01 OID” is displayed on the unit’s display.
3
Press [OK] on the remote control.
The PIN is not displayed.
¾
To edit the Channel List (
>
71, Channel List)
¾
To check the signal condition (
>
72, Signal
Condition)
¾
To change PIN for parental control (
>
79, PIN
Entry)
¾
To sort the Channel List by region (
>
71,
Channel Sorting by Region)
On
It will go into the Power Save in
Standby mode.
On
Timer
Set the start and stop time and then
press [OK].
≥
Power Save in Standby mode is
activated at the set time period.
Off
It is possible to start quickly from the
standby mode. (Quick Start mode)
≥
If you use Home Network ( DLNA )
Server function (
>
77), select “Off”.
This function is not available with
other settings.
Power Save in Standby
From
To
Power Save
0
6
On
OK
Easy Setting
Easy Setting has been completed.
To use Internet functions, network connection needs
to be made first. Proceed Network Easy Setting ?
Select “Yes” to start. Select “No” to exit the Setup.
Yes
No
DMR-HW100EB-VQT3F57_eng.book 14 ページ ２０１１年８月５日 金曜日 午後２時４分
