G
etting
sta
rte
d
VQT3F57
19
∫
Compatible SD card
–SD Memory Card (from 8 MB to 2 GB)
–SDHC Memory Card (from 4 GB to 32 GB)
–SDXC Memory Card (48 GB, 64 GB)
≥
This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory Cards
in FAT32 format and SDXC Memory Cards in
exFAT format.
∫
Setting the protection
∫
Using miniSD card or microSD card
≥
Usable memory is slightly less than the card capacity.
≥
If the SD card is formatted on other equipment, the time
necessary for recording may be longer. Also, if the SD
card is formatted on a PC, you may not be able to use it on
this unit. In these cases, format the card on this unit
(
>
68).
≥
SDHC Memory Cards and SDXC Memory Cards can be
used in equipment that is compatible with the appropriate
cards. (SDHC Memory Cards can also be used in
equipment compatible with SDXC Memory Cards)
Using either of these cards in a non-compatible PC or
non-compatible equipment may result in formatting
etc. and the loss of recorded content.
≥
This unit does not guarantee connection with all
USB devices.
≥
FAT16 and FAT32 file systems are supported.
≥
This unit supports USB 2.0 High Speed.
≥
Although this unit can use USB 3.0 devices as
USB 2.0 devices, in certain cases USB 3.0 devices
cannot be used due to differing connector shape,
larger current ratings, etc. (Use of USB 2.0 devices
is recommended.)
≥
This unit’s USB port does not support bus-powered USB
device.
≥
USB memories support DivX and MKV files less than
4 GB.
≥
When using Communication Camera (TY-CC10W or
compatible equipment) or Wireless LAN Adaptor
(DY-WL10), connect it to the rear terminal of this unit.
(
>
12, 61)
∫
How to hold an SD card
Do not touch the terminal surface.
∫
Handling precautions
≥
Do not expose the terminals of the SD card to water,
garbage or other strange things.
≥
Do not place in the following areas:
–In direct sunlight.
–In very dusty or humid areas.
–Near a heater.
–Locations susceptible to significant difference in
temperature (condensation can occur).
–Where static electricity or electromagnetic waves
occur.
Notes
Notes for the SD cards
Switch the write-protect switch to the
“LOCK” position.
Mini-type and micro-type cards can
also be used, but must be used with
adaptor cards. These are usually
supplied with such cards, or otherwise
customer provided.
e.g.,
LOCK
Notes for the USB devices
Media handling
DO NOT
DMR-HW100EB-VQT3F57_eng.book 19 ページ ２０１１年８月５日 金曜日 午後２時４分
