Conv
enie
nt fun
c
tion
s
VQT3F57
74
Changing the unit’s settings (Setup)
∫
Dynamic Range Compression
To lower the dynamic range for playback. (e.g., at
night)
≥
This does not work depending on broadcasts and
recorded titles.
∫
Downmix
Select the downmix system of multi-channel to
2-channels sound.
≥
Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
≥
There is no effect on “Bitstream” via HDMI AV OUT
and DIGITAL AUDIO OUT terminal.
≥
The audio will be output in “Stereo” during AVCHD
playback.
∫
Digital Audio Output
¾
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
≥
It will be converted to 48 kHz regardless of the
setting when the signals have a sampling
frequency of over 96 kHz.
≥
If “Off” is selected, signals are output as 96 kHz
≥
If “On” is selected, signals are converted to
48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of
96 kHz.)
¾
Dolby Digital / Dolby Digital Plus
≥
When using the DIGITAL AUDIO OUT terminal,
there are following restrictions.
–When “Bitstream” is selected, Dolby Digital
Plus audio is output as Dolby Digital.
–When “PCM” is selected, audio is output as
Down-mixed 2ch PCM.
¾
MPEG
¾
HE-AAC
Select the audio signal to output.
∫
Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
∫
On-Screen Information
Select the approximate time until the channel
information screen (
>
24) disappears automatically.
∫
Unit’s Display
Changes the brightness of the unit’s display.
∫
Screen Saver
This is to prevent burn-in on the screen.
≥
If “On” is selected, the masked-off area on the
screen becomes grey.
Depending on the condition of the unit (Connection,
Setting) the masked-off area on the screen becomes
grey.
Sound
Setup
Sound
Sound
Dynamic Range Compression
Downmix
Digital Audio Output
Audio Delay
Sound
Digital Audio Output
Digital Audio Output
Dolby Digital / Dolby Digital Plus
MPEG
HE-AAC
PCM Down Conversion
≥
Select “PCM” when the connected equipment
cannot decode the respective audio format.
≥
Not making the proper settings may result in
noise.
Display
Setup
Display
Display
On-Screen Information
Unit’s Display
Screen Saver
DMR-HW100EB-VQT3F57_eng.book 74 ページ ２０１１年８月５日 金曜日 午後２時４分
