T
rouble
s
ho
oting
VQT3F57
87
U76
¾
HDMI cannot be output because it is connected to
a model that does not support copyright protection.
U99
¾
The unit fails to operate properly. Press [
Í
/I] on
the main unit to switch the unit to standby mode.
Now press [
Í
/I] on the main unit again to turn the
unit on.
H
or F
(“
∑
” stands for a number.)
¾
There is something unusual. (The service number
displayed after H and F depends on the unit’s
condition.)
¾
Check the unit using the troubleshooting guide
(
>
88). If the service number does not disappear,
do the following.
1. Disconnect the plug from the household mains
socket, wait a few seconds, then reconnect it.
2. Press [
Í
/I] to turn the power on. (The unit may
be fixed.)
If the service number does not disappear despite
after doing the above, request service from the
dealer. Inform the dealer of the service number
when requesting service.
X HOLD
¾
The HOLD function is activated.
Press and hold [OK] and [BACK/RETURN
] at
the same time until “X HOLD” disappears. (
>
20)
DMR-HW100EB-VQT3F57_eng.book 87 ページ 2011年8月5日 金曜日 午後2時4分