T
rouble
s
ho
oting
VQT3F57
90
Troubleshooting guide
The remote control does not work.
¾
The remote control and main unit are using
different codes. Change the code on the remote
control.
¾
Software (firmware) is updating when “UPD
/
”
is displaying on the unit’s display. Wait until the
update is completed. (
>
81)
¾
The HOLD function is activated. (
>
20)
The unit is on but cannot be operated.
¾
Drive has not been selected properly.
Cannot tune channels.
¾
Check the connections.
Startup is slow.
¾
Startup takes time in the following situations:
–The clock is not set.
–Immediately after a power failure or the AC mains
lead is connected.
–When the “Power Save in Standby” is activated.
(
>
78)
Cannot record.
¾
Some broadcasts are copyright protected.
Timer recording does not work properly.
¾
Refer to “Notes on timer recording” (
>
36)
¾
Failed timer recordings are displayed in grey
with
on the Timer Recording screen. (
>
35)
When you programme a timer recording, check the
screen icons. If “!” is displayed, this timer
programme may not be recorded because:
–there is not enough space left.
–the number of possible titles has reached its
maximum.
–programmes are deactivated, etc.
A part or whole of a recorded title has been
lost.
¾
If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable.
We cannot offer any guarantee regarding lost
programmes.
Auto Renewal Recording does not work
properly.
¾
The programme will not be overwritten in the
following cases:
–the programme is protected
–any programme is being played back
–a screen such as DIRECT NAVIGATOR is
displayed
Instead, the programme will be saved as a
separate programme and that will be overwritten.
You have forgotten your PIN number for
parental control.
¾
Refer to “To reset the PIN number for parental
control”. (
>
92)
Image for the Quick View is not smooth.
¾
Image may not be played back smoothly in case of
titles recorded with HD quality or AVCHD format
titles.
The resume play function does not work.
¾
[SD]
Memorized positions are cancelled when the
unit is turned off.
(
[HDD]
will not be cancelled)
Cannot edit.
¾
You may not be able to edit on the HDD if there is
no available space.
Delete any unwanted titles to create empty space.
(
>
44)
Operation
Unit’s display
Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds. (
>
78)
Recording, timer recording and
copying
Play
Edit
DMR-HW100EB-VQT3F57_eng.book 90 ページ ２０１１年８月５日 金曜日 午後２時４分
