Convenient functions
VQT4G61
73
Others
Standby Settings
Power Save in Standby
• On:
It will go into the “Power Save in Standby”
mode.
• On Timer:
“Power Save in Standby” is activated when
the set time comes.
• If the clock has not been set, “Power Save
in Standby” is activated at all hours.
• Off:
It is possible to start quickly from standby
mode. (Quick Start mode)
• This function cannot be enabled when the DLNA
function is enabled in “Home Network function”.
(
>
72)
• The setting may be changed to “Off” automatically
when the setting for video communication is changed.
(
>
61)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When “REWIND LIVE TV” is set to “On”
(
>
68), “Off” cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (
>
26).
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (
>
53).
RF OUT ( Aerial Signal )
Set whether to output the aerial signal or not
from RF OUT while in standby mode (When
“Power Save in Standby” is activated).
• If “On” is selected, the aerial signal is output
from this unit.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use “Set Code1”, the factory set code, under
normal circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
• Operation is possible only with Panasonic
remote controls with “IR6” printed at the bottom
when the remote control code of this unit is set
to “Set Code 4”, “Set Code 5” or “Set Code 6”.
HDD RECORDER
IR6
IR6
DMRHW220GL_eng.book 73 ページ ２０１２年４月２７日 金曜日 午後２時１２分
