Troubleshooting
SQT0136
86
Troubleshooting guide
If there is any problem, the following message is
displayed on the screen.
When you experience problems with
Easy Network Setting
Wireless Settings
Display
Check the following
A conflict with other
devices occurred.
• Please wait a few moments, and
then try again.
A time out error
occurred.
• Setting of the Wireless router for
MAC Address etc.
• The signal may be weak.
• The SSID and the encryption key of
the Wireless router.
• Please wait a few moments, and
then try again.
An authentication
error or a time out
error occurred.
A device error
occurred.
• If the problem is not solved, consult
your dealer.
Easy Network Setting ( Home Network
Connection Check )
Display
Check the
following
1. LAN cable
connection or
Wireless setting:
“Fail”
• Connection of
the LAN cables
(
>
17)
• Settings of the
hub and router
2. IP address setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
• Connection and
settings of the
hub and router
• Settings of “IP
Address / DNS
Settings” (
>
64,
71)
2. IP address setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address setting:
“Pass”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address setting:
“Home
network
available”
3. Connection to
gateway:
“Fail”
Easy Network Setting ( Internet Connection
Test )
Display
Check the following
Cannot find the
server. (B019)
• “Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (
>
64, 71)
No connection could
be made to the server.
(B020)
• The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
• Settings of “Proxy Server Settings”
(
>
64, 71) and the router.
DMRPWT540GL_eng.book 86 ページ 2014年2月6日 木曜日 午前11時28分