Convenient functions
SQT0992
72
4K Networking
You can save 4K videos/photos recorded with
digital cameras and other 4K-compatible devices
to the HDD of this unit and play them back.
Compatible 4K content
• MP4/MOV (4K/24p, 25p and 30p)
- bit rate up to 100 Mbps
- resolution up to 3840
k
2160 25p/30p,
4096
k
2160 24p
• JPEG, MPO
- resolution 3840
k
2160
Photos with a resolution greater than
3840
k
2160 are played back in 3840
k
2160.
Preparation
• Connect a 4K-compatible TV to this unit. (
>
14)
∫
4K videos
[HDD]
Refer to “Playing titles on the HDD”. (
>
34)
[USB]
[SD]
§
1
Refer to “Playing titles on the media”. (
>
37)
∫
Photos
Refer to “Playing photos”. (
>
46)
• Video may not be played back smoothly depending on the
USB device.
• You can also watch the 4K contents stored in the DLNA Certified
media server. (
>
52, Smart Home Networking (DLNA))
∫
4K videos
Refer to “Copying video files”. (
>
45)
∫
Photos
Refer to “Copying photos”. (
>
49)
§
1
[PWT655]
only
Software of this unit can be updated automatically
by the following methods at the specified time.
• From Internet
Network connection and setting are required.
(
>
16, 19)
If a software (firmware) update is available, a
notification is displayed.
Update of the software (firmware) will start when
the unit is turned to standby mode.
• It may take up to a few hours until the update is completed
depending on the network environment.
• The timer recording always takes preference over the
software (firmware) download; if the timer recording is
scheduled to start, the downloading will be performed at the
next opportunity.
• For the latest firmware update information, please refer to
the Panasonic support site below.
• You can also download the latest software (firmware) from
the following website.
http://panasonic.jp/support/global/cs/
Playing back 4K content
Copying 4K content
[HDD]
,.
[SD]
§
1
[USB]
>
[HDD]
You cannot operate the unit until the update
is complete. Don’t remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Update software (firmware) of this unit
• From broadcasts
(Default setting is 3 a.m.
>
71, Software
Update in Standby)
To update the software (firmware)
immediately
Use the “Software Update Now ( Broadcast )”
function or “Software Update Now ( Internet )”
function. (
>
71)
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
Software (Firmware)
Update
DMR-PWT655_550EB_eng.book 72 ページ 2015年9月14日 月曜日 午後2時7分