Setup
TQBS0149
88
Home Network Settings
You can set the DLNA (Server) function.
(
>
70)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
• If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (
>
89)
• If “Off” is selected, the setting for “TV
Anywhere” and “Networked Standby” is
fixed to “Off”. (
>
87, 90)
• When you set “Networked Standby” to
“On”, the setting for this function will also
be changed to “On”, but “Quick Start” will
remain set to “Off”.
• This cannot be set to “On” if the
connection with the wireless broadband
router is not encrypted in the wireless
connection.
Setting device name
It is also possible to change the name of
this unit on the network.
• Select from a preset list
Select the preset name, then press [OK].
• Create name
Enter the name.
Refer to “Entering text”. (
>
78)
Conversion Setting for DLNA
• On:
When playing back on DLNA (Client)
compatible equipment, this setting
reduces the chance of break-ups and
freezing of an image by lowering the
image quality.
• When this is set to “On”, switching the channel or
starting playback will take longer.
Resolution Setting for DLNA
When “Conversion Setting for DLNA” is
set to “On”, select the image quality.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select “Yes”, then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select “Yes”, then press [OK].
• This function cannot be enabled when
“Automatic” is selected in “Registration type for
remote devices”. (
>
above)
• The maximum number of equipment that can be
registered is 16.
DMR-UBC86EN_eng.book 88 ページ ２０１７年８月８日 火曜日 午前１１時１２分
