12
RQT9307
You can enjoy high-quality picture by adding the HDMI cable connection to the 21-pin Scart cable connection
between this unit and your TV.
Connecting to a TV with an HDMI (High De
fi
nition Multimedia Interface) Cable (not
included)
Set “Digital Audio Output” to “HDMI and Optical” (
¼
65).
(The default setting is “HDMI and Optical”.)
To enjoy High Quality Video up-converted to 1080p, you need to connect the unit to 1080p compatible HDTV and set “HDMI
Video Format” in the Setup menu to “1080p” (
¼
65).
Basic Connection
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High De
fi
nition Television), the output can be switched to 1080p, 1080i or 720p HD video.
This unit incorporates HDMI
TM
(V.1.3a with Deep Colour) technology
that can reproduce greater colour
gradation (4096 steps) when connected to a compatible TV.
A lower colour gradation (256 steps), without Deep Colour, will be reproduced if connected to a TV which does not
support Deep Colour.
The unit will automatically set appropriate output to suit the connected TV.
Video sources converted to 1920
1080 resolution, while of high quality, will exhibit somewhat lower subjective
image resolution than true, native 1080p full-HD sources. See dealer for details.
Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
When setting video output to “1080p”, please use the HDMI cables 5.0 meters or less.
Notes
If connecting to equipment that is only compatible with 2 channel audio output, audio with 3 channels or more will be down-
mixed (
¼
84) and output as 2 channels, even if connecting with an HDMI cable (some discs cannot be down-mixed).
You cannot connect this unit to DVI devices that are incompatible with HDCP.
For display units compatible with HDCP (High-Bandwidth Digital Content Protection) that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, picture may not be displayed properly or at all when connecting with a DVI/HDMI switching cable (audio
cannot be output).
Digital Satellite receiver
AV1(TV)
This unit
TV
AV2 (EXT)
AV/VCR
AV
HDMI IN
HDMI IN
HDMI OUT
HDMI
AV
OUT
HDMI cable
21-pin Scart cable
Regarding VIERA Link “HDAVI Control
TM
” function
When connecting with a Panasonic TV (VIERA) or a receiver equipped with the “HDAVI Control” function, linked
operations would be possible. [
¼
40, Linked Operations with the TV (VIERA Link “HDAVI Control
TM
”/Q Link)]
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number: RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30
(3.0 m), RP-CDHG50 (5.0 m), etc.
Non-HDMI-compliant cables cannot be utilised.
Connecting with a Panasonic TV
(VIERA)
If the 21-pin Scart cable is connected,
the following functions are available.
Direct TV Recording (
¼
25)
Watching Digital Satellite
Programmes (
¼
18)
(In this case, make sure to switch
the television input to “AV”.)
DMR-EX769EB.indb 12
DMR-EX769EB.indb 12
2009/01/26 17:06:06
2009/01/26 17:06:06