12
1. Introduction
Thank you for purchasing the 802.11 a/b/g/n USB Wireless LAN Adaptor that provides the easiest
way to wireless networking. This User Manual contains detailed instructions in the operation of
this product. Please keep this manual for future reference.
System Requirements
-
128 MB of RAM or later (recommended)
-
300 MHz processor or higher
2. Driver/Utility Installation
The driver should have been installed before the TV is shipped from the manufacturer. You can
start using its network function without installing driver or utility.
3. Connecting to an Existing Network
1.
Use the remote control that came with your TV to access the network configuration settings
page.
2.
Select the scanning wireless network function. The system starts to scan for available network.
On this list, click Refresh to refresh the list at any time
3.
Select the network you want to connect to.
4.
If the chosen network has security enabled, you will have to setup corresponding security
parameter. Contact the network manager for the correct settings. Select the security type and
fill in required parameters. The options include the following:
WPA/WPA2/CCKM
802.1x
Pre-Shared Key (Static WEP)
None
