manualshive.com logo in svg

Panasonic DP-7240, Operating Instructions Manual

The Panasonic DP-7240 is equipped with a comprehensive Operating Instructions Manual that provides users with detailed guidance on its functionalities. This manual can be easily downloaded for free from 88.208.23.73:8080, allowing customers to access important information and maximize their experience with this exceptional product.

Share
Download
background image

9

Once a month, unplug the machine and 
check the power cord for the following. If 
you notice any unusual condition, contact 
the authorized Panasonic dealer.

●

The power cord is plugged firmly into 
the receptacle.

●

The plug is not excessively heated, 

rusted, or bent.

●

The plug and receptacle are free of 

dust.

●

The cord is not cracked or frayed.

Operating Safeguards

Do not touch areas where these caution 
labels are attached to, the surface may 
be very hot and may cause severe burns.
Do not place any liquid container such as 
a vase or coffee cup on the machine. Spilt 
water can cause fire or shock hazard.
Do not place any metal parts such as 
staples or clips on the machine. If metal 
and flammable parts get into the machine, 
they can short-circuit internal components, 
and cause fire or electric shocks.

If debris (metal or liquid) gets into the 
machine, switch Off and unplug the 
machine immediately. Contact the 
authorized Panasonic dealer. Operating 
a debris-contaminated machine can 
cause fire or electric shock.
Never open or remove machine covers 
that are secured with screws unless 
specifically instructed in the “Operating 
Instructions”. A high-voltage component 
can cause electric shocks.
Do not try to alter the machine 
configuration or modify any parts. An 
unauthorized modification can cause 
smoke or fire.

Consumable Safeguards

Never dispose of toner, toner cartridge or 
a toner waste container into an open 
flame. Toner remaining in the cartridge 
can cause an explosion, burns and/or 
injuries.

CAUTION

Installation and Relocation 
Cautions

Do not place the machine near heaters or 
volatile, flammable, or combustible materials 
such as curtains that may catch fire.
Do not place the machine in a hot, humid, 
dusty or poorly ventilated environment. 
Prolonged exposure to these adverse 
conditions can cause fire or electric shocks.
Place the machine on a level and sturdy 
surface that can withstand a weight of 
the machine. (The machine weight 
without optional unit : 463 lb) If tilted, the 
machine may tip-over and cause injuries.
When relocating the machine, contact 
the authorized Panasonic dealer.

When moving the machine, be sure to 
unplug the power cord from the outlet. If 
the machine is moved with the power 
cord attached, it can cause damage to 
the cord which could result in fire or 
electric shock.

Operating Safeguards

Do not place a magnet near the safety 
switch of the machine. A magnet can 
activate the machine accidentally, 
resulting in injuries.
Do not use a highly flammable spray or 
solvent near the machine. It can cause 
fire.
When copying a thick original, do not use 
excessive force to press it against the 
platen glass. The glass may break and 
cause injuries.
Never touch a labelled area. You can get 
burnt. If a sheet of paper is wrapped 
around the heat roller, do not try to 
remove it yourself to avoid injuries or 
burns. Switch Off the machine 
immediately, and contact the authorized 
Panasonic dealer.
Do not use conductive paper, ex: folding 
paper, carbon paper and coated paper. 
When a misfed paper occurs, they can 
cause a short circuit and fire.
Do not place any heavy object on the 
machine. An off-balance machine can 
tip-over or the heavy object can fall, 
causing damage and/or injuries.

Summary of Contents for DP-7240

















































































































































































































































































































































Reviews:

No comments

Related manuals for DP-7240

JCM GEN5 Series Quick Reference Manual preview
GEN5 Series
Brand: JCM Pages: 22
Oki C610cdn Brochure & Specs preview
C610cdn
Brand: Oki Pages: 4
Avery Dennison TrafficJet Manual preview
TrafficJet
Brand: Avery Dennison Pages: 13
Oce VarioPrint 6180 User Manual preview
VarioPrint 6180
Brand: Oce Pages: 306
G&G IMAGE L2550DW Series User Manual preview
IMAGE L2550DW Series
Brand: G&G Pages: 147
Kyocera EP C320DN Operation Manual preview
EP C320DN
Brand: Kyocera Pages: 72
Xante Ilumina GL User Manual preview
Ilumina GL
Brand: Xante Pages: 106
Canon imagePROGRAF TM-355 Manual preview
imagePROGRAF TM-355
Brand: Canon Pages: 52
Epson C11CA19201 - WorkForce 30 Color Inkjet Printer Quick Manual preview
C11CA19201 - WorkForce 30 Color Inkjet Printer
Brand: Epson Pages: 36
Epson C11CA19201 - WorkForce 30 Color Inkjet Printer Specification Sheet preview
C11CA19201 - WorkForce 30 Color Inkjet Printer
Brand: Epson Pages: 3
Epson C11C694201 - PictureMate Dash PM 260 Color Inkjet Printer User Manual preview
C11C694201 - PictureMate Dash PM 260 Color Inkjet Printer
Brand: Epson Pages: 72
Epson C11C638001 - LQ 300+II B/W Dot-matrix Printer User Manual preview
C11C638001 - LQ 300+II B/W Dot-matrix Printer
Brand: Epson Pages: 120
Epson C11C640001 - LX 300+II B/W Dot-matrix Printer Reference Manual preview
C11C640001 - LX 300+II B/W Dot-matrix Printer
Brand: Epson Pages: 129
Epson C11CA54203 - PictureMate Show Digital Frame User Manual preview
C11CA54203 - PictureMate Show Digital Frame
Brand: Epson Pages: 106
Epson C11CA19201 - WorkForce 30 Color Inkjet Printer Specifications preview
C11CA19201 - WorkForce 30 Color Inkjet Printer
Brand: Epson Pages: 2
Mitsubishi Electric CP9820DW-S User Manual preview
CP9820DW-S
Brand: Mitsubishi Electric Pages: 16
Mitsubishi Electric Smart D90EV User Manual preview
Smart D90EV
Brand: Mitsubishi Electric Pages: 8
Mitsubishi Electric CP9550DW-S Specification preview
CP9550DW-S
Brand: Mitsubishi Electric Pages: 2

Brands by name

Popular brands

Load more brands