Panasonic DP-UB154, Operating Instructions Manual

- 24 -

Reference

„

HDR10+ Setting

You can set enable/disable of the HDR10+ 

function.

By changing this setting to “On”, you can use the 

HDR10+ function under the following conditions:

– A device (TV, etc.) that supports HDR10+ is 

connected (



 10).

– A disc that supports HDR10+ is played back.

y

The “Picture Settings” setting is disabled while 

using the HDR10+ function. (



 22)

„

Advanced Settings

Press [OK] to show the following settings:



 Colour Mode

This setting is for selecting colour-space 

conversion of the image signal.



 Deep Colour Output

Set the output method to be used when this unit 

is connected to a TV that supports Deep Colour.



 HDR/Colour Gamut Output

Set the output type for HDR (High Dynamic 

Range) material.



 Contents Type Flag

Depending on the playback content, the TV will 

output adjusting to the optimal method when a 

TV that supports this function is connected.

*1 It displays images at the highest resolution available on 

your TV.

*2 

A high resolution image/display technology of 

approximately 4000 (width) x 2000 (height) pixels.

*3 A progressive image recorded at a rate of 24 frames 

per second (motion-picture film). Many BD-Video movie 

contents are recorded in 24 frames/second in accordance 

with the film materials.

Sound

„

Dynamic Range Compression

You can listen at low volumes but still hear 

dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby 

TrueHD only)

y

“Automatic” is effective only when playing Dolby 

TrueHD.

„

Digital Audio Output

Press [OK] to show the following settings:



 Dolby Audio



 DTS/DTS-HD



DSD Output Mode

Select the audio signal to output.

y

Select “PCM”, when the connected equipment 

cannot decode the respective audio format. 

This unit decodes the audio format and 

transmits to the connected equipment.

y

If you do not make proper settings the audio 

may be static or noisy.

y

“DSD Output Mode” is effective only when 

connecting the unit with an HDMI cable.

y

When playing DSD 11.2 MHz format file 

regardless of the settings for “DSD Output 

Mode”, PCM signals are output from HDMI 

terminal and 

UB450

COAXIAL terminal.



 BD-Video Secondary Audio

Select whether or not to mix the primary and 

secondary audio (including the button click 

sound).

If “Off” is selected, the unit outputs the primary 

audio only.

UB450



 HDMI Audio Output

This setting selects whether or not to output 

audio from HDMI.

y

To enjoy audio with the HDMI terminal, select 

“On”. To enjoy audio with the COAXIAL 

terminal, select “Off”. Audio will not be output 

from the HDMI terminal regardless of the 

settings for “HDMI(VIDEO) Output Mode”.



y

To enjoy BD-Video that supports Dolby Atmos

®

 or 

DTS:X

®

Connect this unit to an AV amplifier or similar device that 

supports it with an HDMI cable, and select the following 

settings:

– Dolby Audio: “Bitstream”

– DTS/DTS-HD: “Bitstream”

– BD-Video Secondary Audio: “Off”
Dolby Atmos is a trademark of Dolby Laboratories.