Panasonic DP-UB450EB-K, Operating Instructions Manual

- 29 -

Reference

You have forgotten your ratings password.

You want to cancel the ratings level.



The ratings level returns to the factory defaults.

① 

While the unit is on
Press and hold [ ] on the main unit and the 

[0] on the remote control at the same time for 

more than 5 seconds.

–  POWER LED starts to flash, and “00 RET” is 

displayed on the screen.

② 

Press [

] (right) repeatedly on the remote 

control until “03 VL” is displayed on the screen.

③ 

Press [OK].

The TV screen turns black.



In the following cases, HDMI authentication 

takes place and a black screen is displayed:

– When “24p Output” is set to “Automatic”.

–  When the display is switched between 2D 

and 3D images.

–  When you quit the 4K playback by displaying 

another screen, including the HOME menu.

This unit does not recognize the USB 

connection correctly.



Disconnect and re-connect the USB cable. If 

it still does not recognize the connection, turn 

this unit off and on again.



USB devices may not be recognized by this 

unit when connected using the following :

– a USB hub

– a USB extension cable



If you connect USB HDD to this unit, use the 

USB cable that is supplied with the HDD.



If the USB HDD is not recognized, the power 

to the USB HDD may not be supplied. Supply 

power from an external source.

Picture

Images from this unit do not appear on the TV 

screen, or they are distorted.



An incorrect resolution is selected in “Video 

Format”. Reset the setting as follows:



The connected devices are changed. Reset 

the setting as follows:

① 

While the unit is on
Press and hold [ ] on the main unit and the 

[8] on the remote control at the same time for 

more than 5 seconds.

② 

Set the item again. (



 23)

–  When Dolby Digital Plus, Dolby TrueHD, 

and DTS-HD

®

 audio are not output properly, 

select “Yes” in “Default Settings” (



 27) 

and make proper settings.

–  “4K(50p/60p) Output” will be set to “Off”.

Make the correct setting again. (



 23)



PAL discs cannot be correctly viewed on an 

NTSC TV.



When “3D BD-Video Playback” in the Setup 

menu is set to “Automatic”, images may not be 

output depending on the connection method. 

After removing the disc from this unit, select 

“Set before play” in the Setup menu, and select 

“2D Playback” in the setup screen displayed 

when playing 3D discs. (



 25)



When outputting in 4K, images may be 

distorted depending on the HDMI cable. Use 

an HDMI cable that supports 18 Gbps.