3
TQBS0282
Precautions
Unit
To reduce the risk of fire, electric shock or product damage,
≥
Do not expose this unit to rain, moisture, dripping or
splashing.
≥
Do not place objects filled with liquids, such as vases, on
this unit.
≥
Use the recommended accessories.
≥
Do not remove covers.
≥
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
AC power supply cord
The power plug is the disconnecting device.
Install this unit so that the power plug can be unplugged from
the socket outlet immediately.
Small object
Keep the batteries out of reach of children to prevent swallowing.
Unit
≥
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
≥
Do not place sources of naked flames, such as lighted
candles, on this unit.
≥
Some portions of this unit may become hot during use.
When moving or cleaning this unit, disconnect the AC
power supply cord and wait for 3 minutes or longer.
Placement
To reduce the risk of fire, electric shock or product damage,
≥
Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
≥
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
≥
Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
Batteries
Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
≥
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
≥
When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
≥
Do not mix old and new batteries or different types at the
same time.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
≥
Do not take apart or short circuit.
≥
Do not recharge alkaline or manganese batteries.
≥
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote
control for a long period of time. Store in a cool, dark place.
≥
The operation history may be recorded in the memory of
this unit.
WARNING
CAUTION
Wireless LAN connection
The following limits are in place regarding the usage of this
unit. You must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental
damage which may arise due to a failure to obey these limits,
or to any condition of use or disuse of this unit.
≥
Data transmitted and received over radio waves may be
intercepted and monitored.
≥
This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
follow the following points:
– Do not expose this unit to high temperatures or direct
sunlight.
– Do not bend, or subject this unit to strong impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any way.
To dispose or transfer this
unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets
to delete the user settings.
1
Turn the unit off.
2
Press and hold [OK], the yellow button and the blue
button on the remote control at the same time for more
than 5 seconds.
– “00 RET” is displayed on the unit’s display.
3
Press [
1
] (right) repeatedly on the remote control until
“08 FIN” is displayed on the unit’s display.
4
Press and hold [OK] for more than 5 seconds.
DP-UB9000-PC-TQBS0282_eng.book 3 ページ ２０１８年８月２６日 日曜日 午前１０時４５分
