111
Setup menus
(continued)
<MENU>
<Connections with Dolby-E* components>
When the VTR is to be connected to a Dolby-E encoder/decoder for recording or playing back Dolby-E data, set the audio
input and output levels to UNITY, and select the following setup menu item settings.
No.303 AUD EDIT IN = CUT
No.304 AUD EDIT OUT = CUT
No.725 REC CH1 = CH1
No.726 REC CH2 = CH2
No.727 REC CH3 = CH3
No.728 REC CH4 = CH4
No.729 REC CH5 = CH5
No.730 REC CH6 = CH6
No.731 REC CH7 = CH7
No.732 REC CH8 = CH8
No.734 PB FADE = CUT
No.758 JOG PROC = OFF
No.762 AUD RATE CON = OFF
<Notes>
z
Synchronize all devices in the system with the REF signal
designated by the Dolby-E device.
z
Dolby-E data cannot be recorded or played back in the 60
Hz mode.
z
Adjust the timing with the video signals to cover the time
taken by the Dolby-E component for encoding/decoding
outside the VTR.
z
Set the bit depth of the Dolby-E encoder/decoder to 16
bits.
z
Noise will be output from the ANALOG AUDIO OUT
connectors of the channels through which the Dolby-E
data is passing.
z
The audio level meter will deflect beyond the range of its
markings for those channels through which the Dolby-E
data is passing.
z
Noise will be output when a tape on which Dolby-E data
has been recorded is played back in the JOG or VAR
mode.
*
Dolby and the Double D symbol
are trademarks of
Dolby Laboratories Licensing Corporation.
No./Item
Description of setting
A02
P. ON LOAD
This VTR is equipped with VTR MEMORY
for
storing the current settings (All of the set values
in the SETUP MENU, the contents of the
registered items in the PF1/PF2 menu, some of
the contents of the function buttons) and VTR
MEMORY
to
for backing up VTR MEMORY
. Only the SETUP MENU of the selected VTR
MEMORY
to
can be loaded and started on
the VTR MEMORY
.
0000
OFF
Operation is started using the previous settings.
0001
USER1
The VTR MEMORY
data is loaded and opera-
tion started on the basis of this data.
0002
USER2
The VTR MEMORY
data is loaded and opera-
tion started on the basis of this data.
0003
USER3
The VTR MEMORY
data is loaded and opera-
tion started on the basis of this data.
0004
USER4
The VTR MEMORY
data is loaded and opera-
tion started on the basis of this data.
C
1
4
C
1
4
C
1
2
3
4
