35
Audio Split Editing
(continued)
_
Duration display
The duration can be indicated on the display.
Between the video IN and OUT points:
Press the IN button and OUT button at the same time.
Between the audio IN and OUT points:
Press the A-IN button and A-OUT button at the same
time.
Match frame processing function
When two VTRs are used to perform the audio split
editing operations, there will be a total of 8 edit points: the
video IN and OUT points for the player, the video IN and
OUT points for the recorder, the audio IN and OUT points
for the player, and the audio IN and OUT points for the
recorder.
When five of the eight edit points are registered, the
remaining three points are automatically calculated so
only five of the edit points can be registered.
_
When a VTR not equipped with the split
editing function is used as the player
When a VTR for which the video and audio edit points
cannot be set independently is used as the player, split
editing is still possible by setting the audio IN point and
OUT point in the recorder and setting the data of three
points as the video edit points.
<Note>
If, during audio split editing, the video OUT point (or audio
OUT point) only is registered without the audio OUT (or
video OUT point) having been registered and automatic
editing is then executed, editing will continue until either
the audio OUT point (or video OUT point) is registered or
the STOP button is pressed to suspend the editing
operation.
