Panasonic DVD-LS50EB Service Manual Download | Manualshive

Page: 3 / 214

background image

AC adaptor:

Power source:

AC 100-240V, 50/60Hz

Power consumption:

30W

DC output:

9V, 2000mA

Battery pack CGR-H701 (lithium ion):

Voltage:

7.2V

Capacity:

2150mAh

Battery duration

When brightness is set to“-5” while playing DVD
2.5 hours (CGR-H701)
/10 hours (CGR-H703)

*CGR-H703: Option
*Room temperature
*using headphones

When brightness is set to“0” while playing DVD
2 hours (CGR-H701)
/8 hours (CGR-H703)

When brightness is set to“+5” while playing DVD
1.5 hours (CGR-H701)
/6 hours (CGR-H703)

When LCD panel is off while DVD playing
4 hours (CGR-H701)
/16 hours (CGR-H703)

Dimensions (excluding protrusions and battery):

190(W) x 165(D) x 29.2*(H) mm
[715/ 32” (W) x 61/ 2” (D) x 15/ 32” (H)]
*27.8mm(13/ 32”) at lowest point
[H=37.8mm (11/ 2”) including battery]

Mass (including battery):

795g (28.04oz.)

solder:

This model uses lead free solder (PbF).

Note

Specifications are subject to change without notice.
Mass and dimensions are approximate.

Power consumption in standby mode (using included AC adaptor): Main unit: 0.5W

Manufactured under license from Dolby Laboratories.
“Dolby“ and the double-D symbol are trademarks of Dolby Laboratories.

“DTS“ and“DTS 2.0+ Digital Out” are trademarks of Digital Theater Systems, Inc.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rightsowners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassemblyis prohibited.

Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
WMA is a compression format developedby Microsoft Corporation. It achieves the same sound quality as MP3 with a file size that is smaller than that of MP3.

MPEG Layer-3 audio decoding technology licensed from Fraunhofer llS and Thomson multimedia.
HighMAT and the HighMAT logo are either trademarks or registered trademarks of Microsoft Corporationin the United States and/or other countries.

© 2004 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.

«
1
2
3
4
5
...
»

Summary of Contents for DVD-LS50EB























































































































































































































Reviews:

No comments

Related manuals for DVD-LS50EB

Brand: Panasonic Pages: 2

Brand: Onkyo Pages: 15

Brand: Denon Pages: 18

Brand: Power Dynamics Pages: 28

Brand: IceTech Pages: 37

Brand: Vidao Pages: 16

Brand: IAdea Pages: 33

Brand: Aiwa Pages: 31

Brand: Polaroid Pages: 40

2845CI - DVD Changer

Brand: Denon Pages: 38

Reproductor MP4

Brand: Leotec Pages: 32

living home ACTIVY Media Player 150

Brand: Fujitsu Pages: 237

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 6

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands