10.3. Service Mode Table 1
Pressing buttons PLAY, RETURN and TOP MENU at the same time at the unit. Service mode menu will be display.
Select menu by cursor and press the ENTER button to activate the serice modes.
Player buttons
Display
Application
Note
SET
PLAY
+
RETURN
+
TOP MENU
Display Error Code
Displaying the UHF display F_ _ _
Refer to section 10.2.
Self-Diagnosis Function
(UHF Display).
Display Jitter
Jitter check, tilt adjustment
*Display shows xx_yyyzz
"xx" and "zz" shown to the right have nothing to do with the
jitter value. "xx" is the error counter, while "zz" is the focus
drive value.
Refer to section 12.4. for Optical Pickup Tilt Adjustment
Procedure
Refer to section 12.4.
Optical adjustment.
Display Region
Checking the region numbers and broadcast system
Display Version
Checking the program version
Check the IC3008
FLASH ROM program.
Lighting Confirmation Function Lighting Confirmation Function of Display Tube
Display DVD/CD LASER
Current
Checking the laser drive current
Refer to section 8.5.
Optical Pickup
Replacement Procedure.
Write LASER Current Value Writing the laser drive current value after replacing the optical
pickup (do not use for anything other than optical pickup
replacement)
10.4. DVD Self Diagnostic Function-Error Code
Error Code
Error Content
Additional error explanation
Defect 1
Defect 2
Defect 3
Defect 4
U, H error
U11
Focus error
U15
DVD-R not finalized
H01
Tray loading error
H02
Spindle servo error
(Spindle servo, DSC SP motor, CLV servo error)
H03
Traverse servo error
H04
Tracking servo error
H05
Seek error
H07
Spindle motor drive
error
DSC related
F500
DSC error
DSC stops in the occurrence of servo error (start
up, focus error, etc)
OPU
DV5.0
(IC3001)
DV5.0
(IC3001)
servo
drive
F501
DSC not Ready
DSC-system computer communication error
(Communication failure caused by idling of DSC)
DV5.0
(IC3001)
DV5.0
(IC3001)
F502
DSC Time out error
Similar disposal as F500
OPU
DV5.0
(IC3001)
DV5.0
(IC3001)
servo
drive
F505
DSC Attention error
Similar disposal as F500
OPU
DV5.0
(IC3001)
DV5.0
(IC3001)
servo
drive
F506
Invalid media
Disc is flipped over, TOC unreadable,
incompatible disc
DISC
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
ODC related
F600
Access failure to
management
information caused by
demodulation error
Operation stopped because navigation data is
not accessible caused by the demodulation
defect
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
F601
Indeterminate sector ID
requested
Operation stopped caused by the request to
access abnormal ID data
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
F602
Access failure to LEAD-
IN caused by
demodulation error
LEAD IN data unreadable
F603
Access failure to
KEYDET caused by
demodulation error
Access failure to CSS data of disc
F610
ODC abnormality
No permission for command execution
DV5.0
(IC3001)
F612
No CRC OK for a
specific time
Access failure to ID data in DVD series
DV5.0
(IC3001)
F630
No reply to KEY DET
enquiry
(for internal use only)
F631
CPPM KEY DET is not
available till the FILE
terminal
(CPPM file system is unreadable caused by
scratches)
DISC
CPPM
31
DVD-LS83E / DVD-LS83EB / DVD-LS83EE / DVD-LS83EG / DVD-LS835EE / DVD-LS86EB / DVD-LS86EE / DVD-LS86EG