RQTC0152
18
19
RQTC0152
RQTC0152
18
19
RQTC0152
Changing the pla
yer settings
1
Shows
Setup
menu.
Select
Register
2
Select the
menu.
3
Select the
item.
Make the
settings.
4
5
Press to
exit.
Select
Select
Register
“DISC” menu
SETTING STATE
Display the current setting of the items below
AUDIO
Choose the audio
language.
ENGLISH FRENCH SPANISH ORIGINAL
1
OTHER ----
2
SUBTITLE
Choose the subtitle
language.
AUTO
3
ENGLISH FRENCH SPANISH
OTHER ----
2
MENUS
Choose the language
for disc menus.
ENGLISH FRENCH SPANISH OTHER ----
2
RATINGS
Set a ratings level to
limit DVD-Video play.
Setting ratings (When level 8 is selected)
0 LOCK ALL:
To prevent play of discs without ratings levels.
1 to 7:
To prohibit play of DVD-Video with corresponding
ratings recorded on them.
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video
exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
PASSWORD
Change the password
for “RATINGS”
(
above).
1. Select “CHANGE” and press [OK].
2. Enter the current password with the numbered buttons,
then press [OK].
3. Enter the new password with the numbered buttons,
then press [OK].
If “VERIFY” is displayed, please verify the password
and insert it again.
Register
SETTING STATE
Display the current setting of the items below
TV ASPECT
4
Choose the setting to suit your
television and preference.
To select how to show images
made for 16:9 aspect screens
on a 4:3 aspect television.
4:3PAN&SCAN
4:3LETTERBOX
4:3ZOOM
To select how to show images
made for 4:3 aspect screens
on a 16:9 aspect television.
16:9NORMAL
16:9SHRINK
16:9ZOOM
•
•
•
•
•
•
4:3PAN&SCAN
The sides of the picture are cut off so it fills
the screen (unless prohibited by the disc).
4:3LETTERBOX
Picture is shown in the letterbox style.
4:3ZOOM
Scales down the horizontal edges of a 4:3
aspect ratio image.
16:9NORMAL
Stretches a 16:9 aspect ratio image horizontally.
16:9SHRINK
Displays a 4:3 aspect ratio image in the center
of the screen.
16:9ZOOM
Adjusts the horizontal width to display a full
screen image in 16:9 aspect ratio.
TV TYPE
Select to suit the type of television.
STANDARD CRT LCD PROJECTION PLASMA
TIME DELAY
When connected with an AV amplifier and Plasma display, adjust
if you notice the audio is out of sync with the video.
0 ms
20 ms
40 ms
60 ms
80 ms
100 ms
STILL MODE
Specify the type of picture
shown when paused.
AUTO
FIELD:
The picture is not blurred, but picture quality is lower.
FRAME:
Overall quality is high, but the picture may appear blurred.
BLACK LEVEL
Change the black level of the
picture if you connected a television
through the COMPONENT VIDEO
OUT terminals.
LIGHTER:
When connected through VIDEO OUT or S
VIDEO OUT.
DARKER:
When connected through COMPONENT VIDEO OUT.
This setting is irrelevant when connected through the
HDMI AV OUT terminal.
•
“VIDEO” menu
OK
OK
OK
1
2
3
5
6
7
8
9
0
4
The settings remain intact even if you switch the unit to standby.
Underlined items are the factory preset.
•
•
The QUICK SETUP enables successive settings of the items in the shaded area.
1
The original language designated on the disc is selected.
2
Input a code number referring to the table (
page 20).
3
If the language selected for “AUDIO” is not available, subtitles appear in that
language (If available on the disc).
Changing the player settings
4
This may not work depending on the disc. If this does not work, change the
aspect setting of television.
RQTC0152-P(12.19).indd 18
2007-12-25 11:29:58
