13
Pre Installation Information
Setup as SMTP mail server
To install the DX-1000 as SMTP mail server, the following network parameters need to be programmed on
your network and on the DX-1000.
•
IP Address of the DNS Server (if not available, see Note)
•
IP Address of the DX-1000
•
Subnet Mask of the DX-1000
•
Name or IP Address of the Default SMTP mail server
•
IP Address of the Default Router
•
Email Address of the DX-1000 (see Note)
•
Host Name
1. To function as SMTP mail server, the DX-1000’s email address must include its unique Host name within
your company domain. This unique Host name must be registered within your network’s DNS (Domain
Name System) server. Example: DX1000@fax01.panasonic.com
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP
Server Name. If the DNS Server is not available, change the Fax Parameter No. 94 (DNS SERVER) to
”1:Invalid”. Then the machine will prompt you to enter the IP Address of the SMTP Server.
Email Transmission (from the DX-1000 to a PC)
Panafax UF-770
Panasonic
LTR
DX1000@fax01.panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
(Router)
popuser001@panasonic.com
SMTP
POP3
Email reception (from a PC to the DX-1000)
Panafax UF-770
Panasonic
LTR
DX1000@fax01.panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
(Router)
popuser001@panasonic.com
SMTP
01007000002
Note:
01007990002
01007990003
Summary of Contents for DX 1000 - PanaFax B/W Laser Printer
