7
DAILY USER´S MANUAL
•
EBL128 VERSION 2.2.X
•
DOCUMENT NUMBER: MEW01786
•
REVISION: 1
3.
ACCESS LEVELS
INFORMATION ONLY
BUILDING OFFICER
SERVICE PERSONNEL
H4
Present system status
H1
Perform monthly test
H1
Perform monthly test
H6
Display faults
H2
Disable or re-enable
H2
Disable or re-enable
H9
Interlocking outputs and inputs
H3
Set calendar and clock
H3
Set calendar and clock
H10
Change password
H4
Present system status
H4
Present system status
H6
Fault acknowledge
H5
Service
H7
Perform zone test
H6
FAULT Acknowledge
H9
Interlocking outputs and inputs
H7
Perform zone test
H10
Change password
H8
Maintenance
H9
Interlocking outputs and inputs
Described in this document
H10
Change password
4.
LOG ON TO THE CONTROL UNIT (C.I.E.)
USER NAME
Up to ten users, 0 to 9 may be programmed. By default at delivery, three users are available:
0 = Information only
1 = Building officer
2 = Service personnel
PASSWORD
Each user has a password for an access level, for example. "Information only", "Building officer" or "Service
personnel".
4.1.
HOW TO LOG ON
a)
Open the door. Press the button “Access”.
b)
On the keypad, press 0, 1, 2 - - 8 or 9 to select a user. Press “A”.
c)
Type the password for that user. (Six digits. * * * * * *)
After typing a correct password, the first option of the available menus will be displayed. This is a list in
which you can scroll.
For "0", Information only, no password is required.
