Panasonic Eco Solutions Nordic AB
MEW01623
Rev: -
EBL128 Operating Instructions V2.0.x
82
Action
= what to do, e.g. use push button / key signed "Access".
Text in display
= what is shown in the EBL128 (c.i.e.) display.
Comments
= Comments to the text in the "Action" and "Text in
display" columns.
Use "
" and "
" to scroll between the main menus H1-H10.
Use "A" to accept.
Some main menus have sub menus. Use "A" to accept and then "
"
and "
" to scroll between the sub menus (e.g. B1-B10).
NOTE!
The menus are circular, i.e. if you scroll with "
" and the last
menu is reached, the first menu comes up next. It is also possible to
make "quick jumps" within each menu, e.g. in menu H1 press "6" for
a quick jump to menu H6. ("0" = menu x10).
Instead of a menu identification (e.g. B1), the letter L can be shown,
which means that it is a List. Use "
" and "
" to scroll in the list.
If
or
is shown in a menu, use "
" or "
" to get more
information.
Use "
" and "
" to move the cursor in a menu.
Use "Return" to return from a sub menu to a main menu.
Use "Return" in a main menu (H1-H10) to leave the menu system.
NOTE!
You will not be logged off until you close the door or 60
minutes after the last action (i.e. if the key pad / push buttons have not
been used for 60 min.).
You will normally get some information that the action / operation
you wanted is performed, (e.g. "Output xx forced active"). If not, the
information will be "Operation failed!". (Also e.g. if you try to
disable a unit that doesn't exists in the installation.)
