EBL512 G3 V. 3.0.X
- FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS
16
15
DEL
Used to clear / delete all visible entry fields.
16
ESC
Used to stop input of data or to step upwards in the menu system.
17
Key pad
Numeric key pad for the digits 0-9.
18
Enter
Used to accept / select a menu or input of data. Also used to acknowledge fault signal and service
signal.
19
Left / right keys
Used to move the cursor in a menu.
20
Up / down keys
Used to scroll between the menus.
21
Alarms queued
Used when LEDs "Alarms queued" are lit. Scroll through the queued alarm points or zone addresses.
See also 18.1.2. FIRE ALARM on page 38
.
NOTE! To scroll/browse through the queued zones, use the soft key "Next zone" (23).
22 - 25
Soft keys
The function is shown in the display above the soft key. The function of a soft key may vary. If nothing
is shown above the key in the display, the key has no function for the moment.
26
Reset
Used to reset: Fire alarms, co-incidence alarms.
NOTE! Has to be pressed for > 0.5 sec.
27
Silence alarm devices
Used to silence alarm devices / sounders. If “silence alarm devices” is activated, it is indicated by a
symbol in the display, see (35).
28
Silence buzzer
Used to silence the buzzer in the c.i.e. when it is sounding.
5.3.2. PUSH BUTTONS
5.3. DETAILED DESCRIPTION OF THE FRONT
.
