EBL512 G3 V. 3.0.X
- FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS
20
It is highly recommended to change the default user names and passwords and to add a number of new
user names and passwords. Also the Fire alarm access and EBLWEB access columns have to be filled in,
depending on how the user names and passwords shall be used.
In a new c.i.e. (i.e. before any Site Specific Data has been downloaded), only user "0" is available. No pass
-
word is required and you have access to all menus. After download of SSD the downloaded user names
and passwords will be valid.
6. USER DATA
EBL512 G3 has different user levels for different kind of users. To log on to an EBL512 G3 a user name and a password are re
-
quired. Ten different User names with individual Passwords can be used.
Via EBLWin (menu “System”) ten different User names with individual Passwords are possible to define in the "User data" dialog
box. One of three different levels /Types can be selected for each user name. They have to be used to log on to an EBL512 G3 and/
or for Gateway access.
Three User names and Passwords are default:
6.1. USER NAME
Up to ten users, 0 to 9, may be programmed. By default at delivery, three users are available:
• 0 = Information only
• 1 = Building officer
• 2 = Service personnel
