EBL512 G3 V. 3.0.X
- FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS
25
8.1.4. USER LEVEL 2C
After the door has been opened with the fire brigade key ("Door open" symbol
in the symbol area), you have access to level 2A
and after log on as “Building officer” (level 2C), access to the following menus:
H1 Perform monthly test
H2 Disable or re-enable
• B1 Zone or Zone / Address
• B2 Output
• B3 Output type
• B4 Alarm devices
• B5 Routing equipment
• B6 Alert annunciation function
H3 Set calendar and clock
H4 Present system status
• U1 Disablement
• U2 Disablement by time channel
• U3 Open doors
• U4 Sensor values
• U5 Sensors activating SERVICE signal
• U6 Technical warning
• U7 Event log
• U8 Information
H6 FAULT Acknowledge
H7 Perform ZONE TEST ("Test mode")
H9 Interlocking outputs and inputs
• C1 Activated interlocking outputs / inputs
• C2 Activate / deactivate interlocking output
• C3 Disable / re-enable interlocking output
H10 Change password (In this case for “Building officer”.)
